Loading ...
Loading ...
Loading ...
4
Single-Depth Installation (SRCABLEVRT6 & SRCABLEVRT12 only)
Step 5 Align the mounting buttons with the toolless
mounting slots on the side of the rack. Insert
the mounting buttons through the slots and
slide the cable tray downward until secure.
Use (4) M4 x 12 mm pan head screws inside of
the rack rail to fasten the cable tray in place.
Step 6 Repeat Steps 1-5 to assemble and mount the other
two cable trays, then use (2) tie plates and (8) M4
x 8 mm screws to connect adjacent cable trays for
added stability.
•Use(1)tieplateand(4)M4x8mmscrews
to connect the bottom cable tray to the middle
cable tray.
•Use(1)tieplateand(4)M4x8mmscrewsto
connect the top cable tray to the middle cable
tray.
Note: Insert the screws on the opposite side of
the cable tray surface from the tie plate, as shown
in the diagram. Make sure the flat side of the tie
plate faces the cable tray surface so the screws will
thread into the tie plate properly.
SIDE VIEW
SCREWS
CABLE TRAY
TIE
PLATE
201202097 93-3029-EN with Addendum.indd 4 3/5/2012 12:14:58 PM
Loading ...
Loading ...
Loading ...