Loading ...
Loading ...
Loading ...
Installation instructions en
19
17.4 General information
Follow these general instructions during the installation.
¡ For the installation, observe the currently valid build-
ing regulations and the regulations of the local elec-
tricity and gas suppliers.
¡ When discharging the exhaust air, the official and
legal regulations, such as the regional building
code., must be observed.
¡ In order to freely access the fan box for servicing,
select an easy-to-reach installation site.
¡ The surfaces of the appliance are sensitive. Avoid
damaging them during installation.
17.5 Information on the installation situation
¡ Install this appliance in a worktop.
¡ The appliance is not suitable for combined opera-
tion with a gas hob.
¡ To install additional special accessory parts, ob-
serve the enclosed installation instructions.
¡ The width of the extractor hood must correspond at
least with the width of the hob.
¡ To optimally detect the cooking vapours, install the
appliance behind the hob.
To ensure that the appliance does not lose any power,
do not install any wall units above the appliance and
maintain the following clearances:
¡ At least 50cm to the left and right from the appli-
ance to a wall or to an adjacent wall unit
¡ At least 5cm from the frame of the appliance to a
wall
¡ At least 2cm from the Guided Air suction area to a
unit wall
¡ Include a ventilation opening in the base with a
cross-section of 80 cm².
Flush installation of appliances with sharp
corners
Do not install appliances with sharp edges in stone or
granite worktops.
Flush installation of appliances with rounded
corners
You can install appliances with rounded corners into
each worktop.
Loading ...
Loading ...
Loading ...