Loading ...
Loading ...
Loading ...
en Troubleshooting
14
5.
Reset the saturation indicator.
→"Resetting the saturation indicator", Page9
11 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ If the appliance is defective, call Customer Service.
→"Customer Service", Page15
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ Only use genuine spare parts when repairing the
appliance.
▶ If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
11.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
The glass panel is not inserted correctly.
▶
Insert the glass panel carefully as far as it will go.
Liquid flows into the appliance.
▶
Pull out the mains plug or switch off the appliance at the circuit breaker in the fuse box.
▶
Empty the drip trays and remove the grease filters cartridges. →Page12
▶
Dry all accessible places.
▶
Leave the appliance flap open and restart the appliance only after 48hours.
▶
Insert the drip tray and the grease filters cartridges.
The glass panel is removed, and the appliance has been operated.
▶
Insert the glass panel and disconnect the appliance from the power supply for ap-
prox.oneminute.
The appliance flap
does not close com-
pletely.
An object is jammed in the appliance.
▶
Disconnect the appliance from the electricity.
▶
Carefully open the flap and remove the object that has become jammed.
▶
Close the flap carefully.
▶
Connect the appliance to the power supply.
The button illumina-
tion does not work.
The control unit is faulty.
▶
Call the after-sales service.
→"Customer Service", Page15
The lighting does not
work
1
.
Different causes are possible.
▶
Call the after-sales service.
→"Customer Service", Page15
▶
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
The top two LEDs
flash in the left-hand
control panel (7).
The grease filters are saturated.
▶
Clean the grease filters.
→"Cleaning grease filters in the dishwasher", Page13
→"Cleaning grease filters manually", Page13
→"Familiarising yourself with your appliance", Page7
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...