Loading ...
Loading ...
Loading ...
• Connect the appliance to the power supply with a plug. The socket must be earthed. The nominal
voltage and frequency required for the appliance are shown on the appliance’s type plate/label
with basic information.
• Fit the back of the cabinet and the drawers.
• Place the condensation reservoirs, filters, and the tower in the extraction module.
• Test if the appliance operates correctly.
• For flush mounting, seal the hob (see ‘Flush-mount installation into the worktop’).
Removing the built-in appliance
Disconnect the appliance from the power mains and disconnect it from the discharge duct. Use a
suitable tool to remove the silicone seal from around the edge. Remove the appliance by pushing
it upwards from the bottom.
NOTE!
Do not attempt to remove the appliance from the upper side of the counter!
77
Installation
Loading ...