Loading ...
Loading ...
Loading ...
www.PyleUSA.com
9
Product Operating
Scheduling on Display Panel:
1. Turn ON power switch and press PLAN to enter scheduling mode.
2. In scheduling mode, press PLAN to exchange hour and minute, press HOME
to increase number and press SPOT to decrease number.
3. Press CLEAN to confirm the setting. To cancel, long press PLAN for 5 seconds
and then press CLEAN to conrm cancelling.
* When you set the clock time or schedule, all your operation will be conrmed
by tone from robot; If no tone received, your setting is unsuccessful.
4. CLEANING MODE
1. Auto Cleaning
The robot will clean the room automatically and adjust its cleaning according
to the situation.
NOTE:
Press CLEAN button on robot or on remote control to start auto cleaning.
2. Spot Cleaning
Put the robot near a dirty area and press SPOT on remote control to start spot
cleaning.
NOTE:
Spot cleaning will automatically stop after the area is cleaned and then the robot
will turn to selected mode.
3. Edge Cleaning
Put the robot near the edge (wall) and press EDGE on remote control to start
edge cleaning.
NOTE:
Edge cleaning will automatically stop when robot could not detect any edges, or
you could manually press CLEAN to stop edge cleaning.
Loading ...
Loading ...
Loading ...