Loading ...
Loading ...
Loading ...
19
SET-UP
Snowblower Equipped with Cordless Battery
Start
NOTE: To ensure maximum performance and life of lithium-ion
battery packs, charge the battery fully before first use.
WARNING
The battery contains corrosive fluid and toxic material;
handle with care and keep away from children. Do
not puncture, disassemble, mutilate or incinerate the
battery. Explosive gases could be vented during charging
or discharging. Use in a well ventilated area, away from
sources of ignition.
WARNING
Read all safety warnings, instructions, and cautionary
markings for the battery pack, charger and product.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
IMPORTANT: Refer to instructional manual supplied with
battery charger for charging, maintenance and battery disposal
instructions.
NOTE: Do not use if battery or battery adapter is damaged.
Contact Customer Support for assistance and for the name of
your nearest servicing dealer.
CHARGING THE BATTERY PACK IF EQUIPPED
IMPORTANT: Fully charge the battery. Refer to instructional
manual supplied with battery charger for charging, maintenance
and battery disposal instructions.
Figure 60
INSTALLING/REMOVING THE BATTERY PACK
1. Installing the battery pack (Figure 61):
a. Push up on finger tab (a) and lift the battery box cover (b).
b. Remove the battery adapter (c) from the battery box (d).
NOTE: If necessary the battery adapter can be disconnected
from the battery start wiring harness (Insert, Figure 61).
c. Insert the battery pack (e) into the battery adapter. An
audible “click” will be heard when the battery is properly
connected.
d. Place the battery pack and battery adapter into the
battery box so that the battery gauge button and battery
gauge (f) are facing the front of the snowblower.
NOTE: Ensure bottom of battery pack completely sits flat on
the battery box floor.
e. Close the battery box cover. There will be an audible
“click” when the battery box cover is closed and latched.
2. Removing the battery pack (Figure 61):
a. Push up on finger tab and lift the battery box cover (a).
b. Remove the battery adapter (b) and battery pack (d) from
the battery box. (c)
c. Press the battery pack release button (g) and remove the
battery pack from the battery adapter.
c
d
a
b
f
e
g
Figure 61
ADDING FUEL & OIL
Refer to the Engine Operator’s Manual for information on adding
fuel and oil.
Loading ...
Loading ...
Loading ...