Loading ...
Loading ...
Loading ...
P a g e | 20
web: brohn.com.au
6.2 STAINLESS STEEL SURFACES
Clean stainless-steel surfaces using non-abrasive cleaning products that are specifically
designed to be used on stainless steel. To ensure best results, use even pressure and follow
the grain of the stainless steel. Use of a soft cloth reduces the risk of scratching. If the cloth
is wet, ensure that a dry soft cloth is also used to wipe down the surface afterwards to
reduce the risk of any surface rust appearing. Never use metal pads, chemical, abrasive
material or stiff brushes to clean the unit.
6.3 CONTROL PANEL SURFACE
The control panel can be cleaned using warm soapy water. Ensure the cloth is well wrung
before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning.
6.4 CHARCOAL FILTERS
If the rangehood has been installed in recirculating mode, you should be using the
charcoal filter accessories available for purchase separately. These filters can not be re-
used or cleaned and as a general rule the activated charcoal filter should be replaced
every few months or more frequently depending on the amount and type of cooking.
Annual Cleaning for Activated Carbon Filter
Apply when rangehood installed as a recirculation unit. The carbon filters must be
replaced at least once a year depending on how frequent the cooker hood used.
To order a replacement filter, please contact our Customer Service.
6.5 CHANGING A LIGHT GLOBE
The LED lights should not require service. If it requires replacement, plsease check below
or contact Customers Service for more information.
Replacing the bulb: Model BRR108 600, BRR108 900; 60cm/90cm * LED Light*
1. Switch the unit off and unplug the appliance.
2. Remove the stainless steel panel.
3. Remove the light cover by unscrewing the 2 screws.
4. Unscrew the broken light and replace with the
same type and rated LED Light.
Loading ...
Loading ...
Loading ...