Loading ...
Loading ...
Loading ...
P a g e | 12
web: brohn.com.au
4 INSTALLATION
4.1 INSTALLATION WARNINGS
Before starting the installation, please refer to the Safety Information section.
•
Always switch the power off prior to beginning the installation.
•
Ensure to handle appliance carefully as stainless steel can be easily damaged during
installation.
•
Wherever possible, protect the rangehood with the cardboard box or plastic
•
A power point must be located within 1.5m of the power cord exit from the rangehood
and should always be accessible to allow isolation from power during cleaning or
maintenance.
• A 150mm round ducting adapter is supplied, however all other ducting accessories are
not.
•
All ducting must comply with building codes and local requirements.
•
If you are re-circulating the air, rather than ducting, please ensure that the side outlet
grilles are not obstructed in any way as this will affect the efficiency of the rangehood.
• Ensure that the rangehood is mounted in a level position, both horizontally and
vertically. This is essential to ensure the rangehood operates correctly and prevents
grease build up at one end.
IMPORTANT: Never use silicone around your rangehood or flue pieces. Never install the
rangehood or flue pieces into the plaster ceiling which prevents easy access to the
rangehood for servicing requirements.
IMPORTANT: Before installing your rangehood, please record the details of your
rangehood’s rating label. Usually this label is located inside the chamber behind the
aluminium grease filters. This will be helpful should you need to contact for service in the
future.
4.2 INSTALLATION PREPARATION
TOOLS AND MATERIAL REQUIRED FOR INSTALLATION:
Duct tape or cable ties
Ducting relevant to your installation requirements (including any rigid bends, vents
and/or adapters)
Drill and/or screwdriver
Spirit Level
Tape Measure
Loading ...
Loading ...
Loading ...