Loading ...
Loading ...
Loading ...
35
SETTING OVEN CONTROLS
To set a self clean cycle:
1. Be sure the oven is empty and all oven racks
are removed. Remove all items from the oven.
Be sure oven door is completely closed.
2. Press Self Clean. The default 3 hour clean time
will appear in the display. You may accept the
3 hour clean time or choose a dierent clean
duration by entering any time between 2 and 4
hours clean time by entering the time using the
numeric keys.
3. Press OK/START. The warning to REMOVE
RACKS will flash in the display to remind you
that oven racks should be removed before a
self clean.
4. Press OK/START to activate self clean.
Important: Do not open the oven door while the
lock motor is running or when any locking indica-
tors or displays are showing. The oven door is com-
pletely locked in about 15 seconds. Once the oven
door has locked, CLEAN will appear in the display
indicating self clean has started.
Do not force the oven door open when self-clean is
active. This can damage the automatic door-lock-
ing system. Use caution when opening the door
after self-clean cycle is complete; the oven may still
be very hot.
When self clean is finished:
1. CLEAN message will turn o, and Hot will ap-
pear in display window.
2. Once the oven has cooled down (about 1 hour)
and Hot is no longer displayed, the oven door
may be opened.
3. When the oven interior has completely cooled,
wipe away any residue or powdered ash with a
damp cloth or paper towel.
Setting Delay Start Self Clean
To start a delay self clean with default clean time
of 3 hours and a start time of 9:00 o’clock:
Be sure the clock is set with the correct time of
day, the oven is empty, and all oven racks are re-
moved. Be sure oven door is completely closed.
1. Press Self Clean.
2. Press Delay Start.
3. Using numeric keypad, enter 9 0 0.
4. Press OK/START to accept.
If it becomes necessary to stop self clean when
active:
Press OFF.
If Self Clean has heated the oven to a high
temperature, allow enough time for the oven to
cool. Before restarting self clean, be sure to read
important notes below.
CAUTION
To avoid possible burns, use care when opening
the oven door after the self cleaning cycle. Stand
to the side of the oven when opening the door to
allow hot air or steam to escape
NOTE
If your clock is set with the (default) 12 hr display
mode, the delay start for a self clean can only
be programmed to start up to 11 hours and 59
minutes after the time showing in the display (be
sure to set the clock to current time before pro-
gramming a Delay Start).
To set a Delay Start self clean to begin 12 or more
hours (maximum is 23 hours and 59 minutes)
after the time of setting, be sure to first set the
control in the 24 Hr display mode.
If self clean was active and then interrupted by
a power failure or cancelled before the oven was
thoroughly cleaned, it may be necessary to run
another self clean cycle.
If the oven temperature was high enough when
self clean was interrupted the oven control may
not allow another self clean cycle to be set for up
to 4 hours.
Loading ...
Loading ...
Loading ...