Loading ...
Loading ...
Loading ...
16
SETTING SURFACE CONTROLS
Cooktop Display Windows
The range backguard provides a digital window for
each of the cooking zones located on the cooktop.
Power levels and messages are easily monitored
and controlled using the window displays in combi-
nation with the corresponding controls.
Available Power Level Settings
The cooktop control will display power levels rang-
ing from P (Power Boost), H (high)to L (low) . The
settings between 9 and 2 decrease and increase in
1.0 increments. The lowest setting L will display just
below the lowest digital setting of 2.
Power Boost Power Level (P)
When setting an induction cooking zone for the
highest setting (to the POWER BOOST position),
the display will initially show P (Power Boost)
power level for up to 10 minutes. After 10 minutes,
the cooking zone will automatically return to the Hi
setting. The P setting is only available immediately
after activating a cooking zone.
ESEC Error Indicator Message (E)
An error message will be displayed (flashing E)
at power up (or after a power failure) if any of the
surface settings were left in the ON positions. If
a power failure should occur, set all of the four
surface controls to the OFF position. This will reset
the surface controls.
Be sure to reset the clock. Once the surface con-
trols have been set to the OFF positions and the
clock has been set with the correct time of day, the
surface controls should return to normal operation.
If the surface controls do not function and the E
message remains in any display after following
these procedures, contact an authorized servicer
for assistance.
Lockout Window Message (-)
The (-) message will appear in all the surface con-
trol displays whenever the Lockout or Self-clean
feature is active.
Power Boost High
Low Highest number setting
Lowest number setting
Error Message Cooktop Lockout
SETTING SURFACE CONTROLS
Loading ...
Loading ...
Loading ...