Loading ...
Loading ...
Loading ...
21
SETTING OVEN CONTROLS
IMPORTANT
Changing to continuous bake or 12 hour mode
does not change how the cooktop controls
operate.
Changing between continuous bake or
12-hour energy saving feature
The oven control has a built-in 12-hour energy sav-
ing feature that will shut o the oven if the oven is
left on for more than 12 hours.
The oven control can be programmed to override
this feature for continuous baking.
To change between continuous bake or 12 hour
energy saving feature:
1. Press and hold Timer On-Off for 6 seconds
2. Press Self Clean to toggle between 12 Hour
OFF or Stay On feature.
3. Press OK/START to accept choice
Setting the Clock
When the appliance is first plugged in or when the
power supply to the appliance has been interrupt-
ed, the display will flash 12:00. It is recommended
to always set the clock for the correct time of day
before using the appliance.
To Set Clock to 1:30:
1. Press .
2. Enter 1 3 0 using numeric keys.
3. Press OK/START.
Setting Timer
The minute timer allows you to track your cooking
times without interfering with the cooking process.
The timer may be set from a minimum time of 1
minute to a maximum of 11 hours and 59 minutes.
To set timer for 5 minutes:
1. Press Timer On-Off.
2. Enter 5 using numeric keypad.
3. Press Timer On-Off to start the timer. When set
time ends, END will show in the display and the
control will sound a beep three times every 30
seconds until Timer On-O key is pressed.
To cancel the timer when active, press Timer On-
Off again
• The timer does not start or stop the cooking
process. It serves as an extra minute timer that
will beep when the set time has run out. The
timer may be used alone or while using any of
the other oven functions.
• When timer is set for more than 1 hour it will
display hours and minutes until 1 hour remains.
When less than 1 hour remains, the display
counts down in minutes and seconds. With
less than 1 minute remaining, only seconds will
display.
• If the timer is active during a cooking process,
the timer will show in the display. To view the
status of any other active oven function, press
the key of the cooking function once and it will
appear in the display for a few seconds.
Add 1 Min
Use the Add 1 Min feature to set additional minutes
to the timer. Each press of the key will add 1 min-
ute. If Add 1 Min is pressed when the timer is not
active, the timer will activate and begin counting
down from 1 minute.
To add 2 minutes to the timer:
Press Add 1 Min twice.
Setting 12 Hour or 24 Hour display mode
The clock display mode allows you to select 12 hr
or 24 hr modes. The factory pre-set clock display
mode is 12 hours.
To set 12 hr or 24 hr display mode:
1. Press and hold for 6 seconds.
2. Press Self Clean to toggle between 12 Hr day or
24 Hr day display modes.
3. Press OK/START to accept the choice.
NOTE
The clock cannot be changed when a Bake Time,
Self Clean, Delay Start, or cooking feature is ac-
tive.
Loading ...
Loading ...
Loading ...