Speed Queen FV6000WN 27 Inch Commercial Front Load Washer with 3.42 Cu. Ft. Capacity, Revolutionary Balancing Technology, Quantum Gold Pro Control, 1200 RPM Spin Speed, Integrated Meter Case, and ENERGY STAR Certified: Coin Drop Installed: Coin Box Not In

Installation/Operation - Page 24

For FV6000WN.

PDF File Manual, 27 pages, Read Online | Download pdf file

FV6000WN photo
Loading ...
Loading ...
Loading ...
Troubleshooting
Try these troubleshooting tips before making a service call. They
may save you time and money.
Washer Symptom Possible Cause/Solution
Won’t Fill Make sure power cord is plugged all the way into the electrical outlet.
Check the laundry room fuse or circuit breaker.
Make sure that the controls are properly set.
Press START keypad.
Make sure that the loading door is closed tightly.
Make sure hot and cold water faucets are turned on.
Make sure that the fill hoses are not kinked or twisted.
Clean the screens in the water mixing valve and the filter screens located at the faucet
end of the fill hoses.
Won’t Start Make sure power cord is plugged all the way into the electrical outlet.
Check the laundry room fuse or circuit breaker.
Make sure that the controls are properly set.
Press START keypad.
Make sure that the loading door is closed tightly.
Insert coin(s) or card.
Make sure door latch is properly adjusted relative to door lock.
Won’t Spin/Tumble Make sure power cord is plugged all the way into the electrical outlet.
Check the laundry room fuse or circuit breaker.
Make sure that the controls are properly set.
Press START keypad.
Make sure that the loading door is closed tightly.
Broken drive belt. Call the service person.
Foreign object trap in pump may be clogged. Clean the trap. Refer to Maintenance
section.
Stops/Pauses During Cycle Pauses are part of the washers normal operation.
Check the laundry room fuse or circuit breaker.
Wash load may be unbalanced. Washer will stop and then restart spin automatically.
Won’t Drain Make sure drain hose is not kinked or twisted.
Make sure drain hose is not clogged.
Make sure drain receptacle is not clogged.
Refer to the Installation instructions to make sure that the drain hose has been proper-
ly installed.
Foreign object trap in pump may be clogged. Clean the trap. Refer to Maintenance
section.
Table continues...
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
24 Part No. 807871ENR3
Loading ...
Loading ...
Loading ...