Loading ...
Loading ...
Loading ...
64
Prerequisites
●
After the corresponding alarm type (
General
,
Motion
, or
Alarm
) is enabled, the record channel
links recording. For details, see "6.3 Setting Record Plan".
●
Enable auto record mode, the record linkage will take effect. For details, see "6.2 Setting Record
Control".
Setting Record Linkage
On the
Alarm
page, click to enable record linkage, select the channel as needed, and set
Post-Record
to set alarm linkage and record delay.
After
Post-Record
is configured, alarm recording continues for an extended period after the alarm
ends.
Figure 4-47 Record linkage
4.6.1.2.3 Snapshot Linkage
After snapshot linkage is configured, the system can automatically alarm and take snapshots when
an alarm is triggered.
Prerequisites
After the corresponding alarm type (
General
,
Motion
, or
Alarm
) is enabled, the snapshot channel
links capturing picture. For details, see "6.3 Setting Record Plan".
Setting Record Linkage
On the
Alarm
page, click to enable snapshot linkage, and select the channel as needed.
Figure 4-48 Snapshot linkage
4.6.1.2.4 Alarm-out Linkage
When an alarm is triggered, the system can automatically link with alarm-out device.
On the
Alarm
page, click to enable alarm-out linkage, select the channel as needed, and then
configure
Post alarm
.
When alarm delay is configured, alarm continues for an extended period after the alarm ends.
Figure 4-49 Alarm-out linkage
Loading ...
Loading ...
Loading ...