Loading ...
Loading ...
Loading ...
117
Figure 8-7 Fire warning
Step 5 Select the fire warning mode as needed.
Step 6 Draw the detection area, and configure the sensitivity.
Click then color in , set the area name, and then drag the mouse on the
image.
●
The higher the sensitivity is, the easier a fire will be triggered.
●
Th whole image is the detection area by default. You can draw multiple detection areas.
Step 7 Set the anti-dither period.
The camera only records one alarm event during the anti-dither period.
Step 8 Set arming periods and alarm linkage action. For details, see "4.6.1.2 Alarm Linkage".
Click
+ Event Linkage
to set the linkage action.
Step 9 Click
Apply
.
To view alarm information on the alarm subscription tab, you need to subscribe relevant
alarm event. For details, see "4.6.1.3.2 Subscribing Alarm Information".
8.5.2 Configuring Smoke Detection Rule
After configuring smoke detection rule, when the visible channel detects smoke, an alarm is
triggered, and the system performs linkages such as recording, alarm output, sending email, audio,
alarm light, and snapshot.
Step 1 Select
AI
>
AI Config
>
Smart Thermal
.
Loading ...
Loading ...
Loading ...