Loading ...
Loading ...
Loading ...
99
see "4.3 Configuring Camera Parameters".
6.2 Setting Record Control
Set parameters such as pack duration, pre-event record, disk full, record mode, and record stream.
Step 1 Click
Record
in the main page, and then click the
Record Control
tab.
Figure 6-7 Record control
Step 2 Set parameters.
Table 6-2 Description of record control parameters
Parameter Description
Max Duration The time for packing each video file.
Pre-Record
The time to record the video in advance of a triggered alarm event.
For example, if the pre-event record is set to be 5 s, the system
saves the recorded video 5 s before the alarm is triggered.
When an alarm or motion detection links recording, and the
recording is not enabled, the system saves the video data within
the pre-event record time to the video file.
Record Mode
When you select
Manual
, the system starts recording; when you
select
Auto
, the system starts recording in the configured time
period of record plan.
Record Stream
Select record stream, including
Main Stream
and
Sub Stream
.
Step 3 Click
Apply
.
6.3 Setting Record Plan
After the corresponding alarm type (
Normal
,
Motion
, and
Alarm
) is enabled, the record channel
links recording.
Set certain days as holiday, and when the
Record
is selected in the holiday schedule, the system
records video as holiday schedule defined.
Step 1 Click
Record
on the main page, and then click the
Time Plan
tab.
Loading ...
Loading ...
Loading ...