Loading ...
Loading ...
Loading ...
Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
Before the oven can be used, follow these
procedures:
1. Plug in the oven. The oven display will begin
flashing "88:88"
2. Touch the STOP/CLEAR pad.
will appear.
3. Set clock.
TO SET THE CLOCK
° Suppose you want to enter tile correct time of day
12:30 (A.M. or P.M.).
TIMER
TouCh CLOCK pa&
_/l-t
2 -'"-:'":"-' I
Enter the correct time
tF-L_e U
of day by touching the
numbers in sequence.
3 TIMER
CL_ _ --I. --IS-I
Touch CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, "ERROR" will appear in the display.
Touch the CLEAR pad and re-enter the time.
, If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show "88:88" after the power is reinstated. If this
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
STOP/CLEAR pad and reset the clock for the correct
time of day.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Return the time of day to the display.
4. Stop the oven temporarily during cooking, touch the
STOP/CLEAR pad once.
5. Cancel a program during cooking, touch the STOP/
CLEAR pad twice.
TiME COOKING
Your oven can be programmed for 99 minutes 99
seconds (99.99). Always enter the seconds after the
minutes, even if they are both zeros.
• Suppose you want to cook for 5 minutes at 100%.
TO SET POWER LEVEL
There are eleven preset Dower levels.
Using lower cower levels ncreases the COOKingtime
which is recommended for foods such as cneese milk
and ong slow cooking of meats. Consult cookbook or
recl 3es for specific recommendations.
twice 90%
3 times 80%
4 times 70% Medium H gh
5 ttmes 60%
6 times 50% MediUm
7 times 40%
8 times 30% Med Low/Defrost
9 times 20%
10 times 10% L0W
11 times 0%
o
• Suppose you want to defrost for 5 minutes at 30 %.
[ °"-"-'1
Enter cooking time. L _J • U IJ
I POWER [ If| rl'--I
2 I LEVEL_I X8 / F -- ZJU
Touch POWER LEVEL pad
8 times or hold down until
the desired power level
appears.
;3 [ START r ,::,-,,-,
Touch START pad.
11
Loading ...
Loading ...
Loading ...