Loading ...
Loading ...
Loading ...
on direct current (DC). A considerable voltage drop will
cause a loss of power and the motor will be overheated.
3.1.1 PREPARE A DRIP LOOP
Recommend the use of a drip loop as below so the
water can not run along the power cord even possibly
reach the electrical outlet and plug.
7
14
WARNING
Keep the extension cord clear of the working area.
Position the cord so that it will not get caught on
lumber, tools, or other obstructions while you are
working with a power tool. Failure to do so can result
in serious personal injury.
4 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
5 INSTALL THE UPPER PANEL
22
23
1. Align the screw sleeves of the front panel (2) with
the screw holes on the upper handle (23).
2. Tighten them with a Phillips screwdriver (not
included).
6 INSTALL THE SPRAY GUN
HOLDER
3
1. Align the screw sleeves of the spray gun holder (3)
with the screw holes on the upper handle.
2. Tighten them with a Phillips screwdriver (not
included).
7
English
EN
Loading ...
Loading ...
Loading ...