Greenworks GPW2500C

Owner Manuals - Page 14

For GPW2500C.

PDF File Manual, 16 pages, Read Online | Download pdf file

GPW2500C photo
Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE
CAUSE
SOLUTION
The motor buz-
zes, but the ma-
chine does not
start.
The supply volt-
age is low.
Make sure that
only the pres-
sure washer is
running on the
circuit.
The pump sys-
tem has residual
pressure.
1. Turn "OFF"
the machine.
2. Pull the
spray gun
trigger on
spray wand
to release
pressure.
3. Turn the ma-
chine "ON".
Voltage loss due
to use of an im-
proper extension
cord.
Disconnect the
extension cord,
and connect the
machine directly
into the outlet.
Pressure washer
not used for long
periods.
Call customer
service.
Residual friction
among compo-
nents. Unit might
emit a humming
noise.
1. Disconnect
the water
supply.
2. Power "ON"
the machine
for 2 to 3
seconds.
3. Repeat the
above step a
couple of
times or until
the motor
starts.
There is no wa-
ter.
The water supply
is off.
Turn the water
supply on.
The garden hose
is kinked.
Remove kink in
garden hose.
15 TECHNICAL DATA
Universal Motor 120V~ 60 Hz, 14 Amps
Max. Pounds Per Square
Inch Pressure
2500 PSI
Rated Gallons Per Minute 1.2 GPM
Maximum Inlet Water Tem-
perature
104 °F (40 °C)
Cleaning Units 3000 C.U.
Weight 58.74 lbs. (26.7 kg)
Double-insulated con-
struction.
16 LIMITED WARRANTY
YEAR
10
MOTOR
WARRAN TY
YEAR
LIMITED
CONSUMER
WARRANTY
YEAR
LIMITED
COMMERCIAL
WARRANTY
1
Greenworkshereby warranties this product, to the
original purchaser with proof of purchase, 1
year commercial power train warranty, 3 years
consumer warranty (against defects in materials,
parts or workmanship), and 10 years motor
warranty.Greenworks, at its own discretion will repair
or replace any and all parts found to be defective,
through normal use, free of charge to the customer. This
warranty is valid only for units which have been used
for personal or commercial use and that have been
maintained in accordance with the instructions in the
owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 1-855-345-3934.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser’s responsibility to
pay transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks.
USA address: Canadian address:
Greenworks Tools Greenworks Tools Canada
Inc.
14
English
EN
Loading ...
Loading ...