Loading ...
Loading ...
Loading ...
A80 Pro Intelligent Diagnosis System
14
Read live data: It is to read the parameters of the current engine running, such as oil pressure,
temperature, engine speed, fuel temperature, coolant temperature, intake air temperature and so on.
Through these parameters, we can basically directly determine which problems have occurred, so that
we have narrowed the scope when performing maintenance, which is more convenient. For many
vehicles in the actual operation process, because of the deviation of the operating characteristics of the
electronic components, the sensitivity reduction, which all can be judged in the data stream; For this
function, we need to be very familiar with the parameters of the engine, such as: idle speed For
800RPM or 750RPM, when the operating temperature of the coolant is 80-105 degrees Celsius, the
operating voltage and time of each sensor and actuator should be.
Actuation components test: The main purpose is to determine whether these actuator
components are working properly.
Special Features: Special models only.
（2）Toolbar function buttons description
Functional Buttons Descriptions
Returns to the previous interface.
Click to record the data, click again to send your feedback to XTOOL service
center.
3.3 Read ECU
This function is to read the ECU version information, in some of the electronic control displayed
as "System identification" or "System Information" menu, the meaning is the same., It reads the ECU
related software, hardware version and part number and other information. As shown in the following
figure.
Loading ...
Loading ...
Loading ...