INNIOASIS G1
Digital Music Player
SD Slot
Home
USB-C Port
Speaker
Restar
3.5mm output
Back
Volume +
Volume -
Power
Key DiagramButton & Port Introduction
Button & Port Introduction
Power:
·In shutdown state, press and hold for 3
seconds to turn on.
·In power-on state, long press for 3
seconds to activate the shutdown options:
Power o, Restart.
·Short press to turn o / on the screen.
Volume + / - : Press + / - to turn up/down
the volume.
USB-C: Connect type-c cable for charging
and file transfer.
Restart: Long press for 3 seconds with the
pin, the device will be reboot.
Back: Click to come back to the previous
page.
Home: Click to come back to homepage.
Long press to open the background
process management (Recently used
apps), swipe left/right to remove the
selected process.
SD slot: Expand storage of the device,
maximum support 2 TB TF / Micro-SD card.
3.5mm output: Connect your headphones
or external speakers as audio output.
Button & Port Introduction
1. Transfer from your computer:
·For Windows:
1) Use the included USB cable to connect
·For MacOS:
1) Please download and install the MTP
device file transfer software. The recom-
mended software is as follows:
OpenMTP: https://openmtp.gane-
shrvel.com/
MacDroid: https://www.macdroid.app/
e-books and other files from your
computer and paste them into the target
folder of “G1” device, just like using a
normal USB flash drive.
2) Copy the downloaded music or videos,
the player to your computer. The
computer will automatically recognize
the device and install the driver. After
the installation is successful, Click "My
Computer", you will find an MTP device
named "G1" in the list of devices and
drives, click on it to access the player's
internal/external SD card and its folders.
How to Transfer Music or Video
2. Transfer from your phone:
·For Android:
Transfer music or videos from Android
smartphone to the player requires the
MiniShare app. Please scan the following
QR code to download and install MiniS-
hare.
2) Launch the installed OpenMTP or
3) Copy the downloaded music, videos,
e-books and other files from the Mac
device and paste them into the target
folder of the device "G1".
MacDroid software and follow the
prompts to connect the player to the
Mac device. You will find the device
named "G1" and all its folders in the
device list of the software.
Minishare for Android
How to Transfer Music or Video
① Android phone G1 Player
a. Click the “File transfer” icon on the
b. Open the MiniShare app on Android
phone, also click the icon in the
middle of the window to switch to
Send/Receive mode, and click the
"Send" icon, then select the music
and videos to be transferred, and
click the "Send" button that pops up
below. Next, you can find the avatar
and name of G1 player in the search
radar, click it to establish a connec-
tion and start transferring files (If you
have set a hotspot password, you
will be asked to enter it). If not found
in the search radar, you can also click
the "Scan QR Code" button below to
activate the camera scanning, and
scan the QR code of G1 player to
establish a connection, and then
desktop of the G1 player to open the
MiniShare App. And click the icon
in the middle of the window to
switch to Send/Receive mode, and
then click the "Receive" icon, and the
device will start hotspot and pop up
a QR code for scanning.
How to Transfer Music or Video
② Android phone G1 Player
a. Click the “File transfer” icon on the
desktop of the G1 player to open the
MiniShare app. And click the icon
in the middle of the window to
switch to Create Group/Join mode,
and then click the "Create Group"
icon, and the device will start
hotspot and pop up a QR code for
scanning.
b. Open the MiniShare app on Android
phone, and also click the icon in
the middle of the window to switch
to Create Group/Join mode, click the
"Join Group" icon. Next, you can find
the avatar and name of G1 player in
the search radar, click it to establish
a connection and start transferring
files (If you have set a hotspot
password, you will be asked to enter
it). If not found in the search radar,
you can also click the "Scan QR Code"
button below to activate the camera
scanning, and scan the QR code of
start to transfer files.
How to Transfer Music or Video
* The pictures and videos in the Photos App
can be transferred directly to the G1 player.
Please refer to the FAQ section in the “File
Transfer” chapter.
Tips: In the Create Group/Join Group mode,
multiple devices are allowed to join the same
group to transfer files between each other.
G1 player to establish a connection,
and then start to transfer files.
·For IOS:
Since IOS is a closed source system, the
music stored on the iPhone cannot be
transferred directly to the G1 player. You
must first export the music to your
computer from your iPhone with iTunes or
other third-party software (such as iTools),
and then transfer to the G1 player from
your computer (please refer to the
"Transfer from your computer" section).
How to Transfer Music or Video
MUSIC
1. Know The Main Window of Music App
Click the Music app on the player’s desktop
to enter the main window. Here, there are
4 commonly used tabs for you to custom-
ize the function menu of the app, and
manage songs and playlists. As below:
1) Including User login, Function menu,
·Import Music Via WiFi: (only applicable to
models with WiFi)Import music in batches
from your computer and cellphone via
WiFi. The player and the sending device
must be under the same wifi.
·Music scan: Scan music in all folders or
specific folders. Dierent scanning rules
can be selected.
·Equalizer: Enable or disable equalizer,
you can choose Pop, Blues, Classic, Jazz,
Rock, Dance, Metal, Voice, Custom, etc.
·MSEB: enable/disable MSEB sound
adjustment.
·Plugins: Add playback plugins.
·Sleep timer: Set the sleep time from 0 to
120 minutes, and once the set time is
exceeded, it will stop playing music.
Settings, etc.
MUSIC
·Settings: More setting options can be
found here, such as Show lyric, Resume
play from last position, Font size,
Language, Album cover display, etc.
·Quick guide: Guide you to operate the
App
·Exit: Close and exit the music App
·Artist: Organize songs by artist name
·Genre: Organize songs by their genre type
·Title: Show all local songs, including
device internal storage and external SD
card. And sort in alphabetical order by
default.
·Folder: Show all local folders, including
the device internal storage and external SD
card. You can quickly access the target
folder and add songs to the playlist in
batches.
* If you want to display only the folders containing music, you
can enable the "Filter non-music files and folders" item in
“Music scan”
2) Manage your songs according to
dierent categories. For example:
·Album: Organize songs by album name
MUSIC
·Album Artist: Organize songs by album +
artist
·Favourite: List all songs marked as
Favourite.
·Recently: List those recently played songs
·Playlist: List all playlists you have created.
Here you can click to create a new
playlist, or click to import a playlist.
Moreover, there are more shortcut menus
under each song category to meet your
dierent operating needs. For example:
3) Manage all your lists, including:
4) Quickly search for Tracks, Artists,
Albums or Genres.
1) Shue all: Click “Shue all” every
2) : Click this icon under Title or Folder
time, it will refresh the shue sequence.
to activate the selection mode, and then
click the check box in front of target files
one by one to select it. Next, you can do
in the shortcut bar at the bottom:
MUSIC
· Enqueue(next track) -- Assign the
currently selected song as the next track.
3) Long press any item under Title or
Folder, you can:
· Add to playlist -- Add the currently
selected song to a specific playlist.
· Send to -- Unavailable
· Delete -- Delete the currently selected
song
Note: To activate the selection mode under Album, Artist,
Genre, Album Artist, long press any item under it.
· Enqueue (next track) -- Assign the
currently selected song as the next track.
· Enqueue (last track) -- Add the current
song to the playback sequence.
· Add to playlist -- Add the current song
to the playlist.
· Properties -- View the details of the
current song
· Delete track -- Delete the current song
· Send to -- Unavailable
· Show album info -- View the info of
the album where the song is located.
MUSIC
· -- Switch between the linear progress
bar and the circular progress bar
· --Shue all. Click it to switch to List
loop, Loop single, Sequential play.
· --List loop
· --Loop single
· --Sequential play
· --Click to switch to the next song
· --Click to switch to the previous song
· / --Play/Pause
· --View the playlist of the current song.
· --Enable shortcut menu: Add to playlist,
Equalizer, Show album info, Properties,
Obtain lyrics and cover art online
2. Know The Music Playing Window
Click the thumbnail bar at the bottom of
the main window to access the music
playing window. Here, you can view the
album cover, lyrics, details (Samplerate,
Bits, Bitrate, etc.), and control the playback
process. The following are some common-
ly used keystrokes.
MUSIC
3.FAQ
1) How to create a playlist？
Click “ New playlist” in the “Playlist” of
the list-tab , then enter the name you
want, and click Ok·
2) How to add songs to the playlist？
·Add single: Long press the target track,
3) How to view lyrics?
Swipe left in the middle of the playing
window to switch between the album
cover, lyrics page, and details page. Lyrics
come from your local lrc file. If lrc is
missing, you can also click the icon in the
upper right corner and select "Obtain lyrics
and cover art online" to get.
and select "Add to playlist" in the pop-up
menu, Next, Select an existing playlist or
click “New Playlist” to create a new
playlist for store.
·Add in batch: Click this icon under
Title or Folder to activate the selection
mode, and then click the check box in
front of target files one by one to select it.
Next, Then select "Add to playlist" in the
bottom toolbar.
MUSIC
4) Added a new music folder or SD card,
but the device did not find the music
stored in them，How to do？
Please click on the icon in the main
window to select and perform “music
scan”.
VIDEOS
1. Know the video management window
Click the Videos app on the player’s desktop
to enter the folders management window.
Here, all folders with videos are displayed.
Click any folder to enter the video manage-
ment window. You can do the following in
these 2 windows.
1) Click the icon in the upper left corner, you
can get more function menu.
App Language -- Set the language of
the app. Defaults to the system language
App Theme -- Set the theme of the
app, such as the background color of the
title bar and window.
Local Music -- List all local music. You
can click to play the song.
Equalizer -- You can activate/deacti-
vate EQ to choose Normal, Classical,
Dance or Custom mode, and adjust bass
and virtualizer.
Video Playlists -- You can create your
own video playlist, add videos to it, and
specify the playback mode: Repeat All,
Shue All.
VIDEOS
Network Stream -- Enter the URL to
play the video, the target website or
server support is required.
Local Network -- Access and play video
files on local LAN servers. Requires server
support.
Local Player Settings -- Provide more
App settings, such as Decoder, Audio,
Subtitle, etc.
·Refresh -- Refresh the window to show
the latest folders and files.
·Create Folder -- Create new folder
i. Check/uncheck of single/multiple
videos -- Click the target videos one
by one to select them, click again to
deselect.
·Select -- Click this option to activate the
selection window and perform more
actions on the selected video, including:
2) Click the icon ，you can adjust the view
mode, layout and sorting of the folders or
videos management windows.
3) Click the icon in the upper right corner, 3
options are available:
VIDEOS
ii. Check/uncheck all videos -- Click
the button in the toolbar to select
all, click again to deselect.
iii. Move selected videos -- Click the
button on the toolbar to activate the
popup window. Next, return to the
target folder through the button in the
upper left corner, and then click the
MOVE HERE button to start moving, or
you can click “+ Create New Folder”
firstly and then click "MOVE HERE".
iv. Copy selected videos -- Click the
button on the toolbar to activate the
pop-up window. Next, return to the
target folder through the button in the
upper left corner, and then click the
COPY HERE button to start moving, or
you can click “+ Create New Folder”
firstly and then click "COPY HERE".
v. Add selected videos to playlist --
Click the button in the toolbar to
activate the list popup, and then
select an existing playlist to add the
selected videos to the list. Or click
“+Create New Playlist” to generate a
new playlist for adding.
VIDEOS
vi. Marked selected videos --Click the
button in the toolbar to mark the
selected videos as: Last played, New,
Finished, None.
vii. Rename selected video – (only
available when 1 video is selected.)
Click the button in the toolbar to
rename this videos.
viii. Delete selected video -- Click the
button in the toolbar to delete the
selected videos.
2. Know the video playback window
Click the video you want to play in the video
management window to enter the playback
window. Here, provide you with a lot of
shortcut buttons to make you get a better
viewing experience.
Screen Rototion -- Click it to rotate the
screen to horizontal or vertical.
Speed-- Click it, and drag the speed-bar
or click “+ / -” to change the playback speed
(Min 0.25X, Max 4.0X).
Background play-- Enable/disable
background playback, once enabled, you
1X
VIDEOS
can access other apps without exiting video
playback
Equalizer-- Enable/disable EQ, you can
choose Normal, Classical, Dance, Flat, Folk,
Heavy metal, Hip Hop, Jazz, Custom, etc.
Night Mode-- Switch to night mode, click
again to return to Normal mode.
Shue -- Switch to shue mode.
Loop -- Switch to loop mode.
Mute -- Turn o video sound.
Sleep Timer -- Set the sleep time, and the
video will automatically stop playing when
the set time is reached.
A-B Repeat -- Click and drag the progress
bar to define the time point of A and B, and
then the player will automatically repeat the
segment between A to B.
Customise items-- Customize the shortcut
functions in the upper right corner and lower
right corner. Up to 5 items can be added. The
optional items as below.
·SW Hardware Acceleration -- Here you
can choose the decoder, such as: HW
decoder, HW+ decoder, SW decoder
VIDEOS
· Playlists -- View the playlist of
currently playing videos, you can
remove a video from the playlist
· Audio Track -- Select or disable
audio tracks, or open audio tracks in
local folders, and set the time of
synchronization.
· Subtitles -- Open a local subtitle
file or search for available subtitle
files online.
· Popup Window -- Reduce the
playback window to pop-up mode
so that you can perform other folder
operations at the same time without
exiting the playback.
· Zoom -- Switch the viewing size:
100%, Fit to screen, Crop,
Stretch.
/ -- Lock / unlock the operation on the
window. once locked, all keys and menus
are invalid. Click it again to restore.
-- Click to switch to the next video; Long
press, a pop-up menu will let you choose the
playback mode: Loop one, Loop all, Shue.
-- Click to switch to the previous video.
VIDEOS
-- Play/Pause
-- Click this icon in the upper right corner,
more menu options will give you more help.
such as Display Settings, Aspect Ratio, etc.
In addition, some faster operations are
available for reference:
·Swipe up/down on the right side of the
playback window to quickly adjust the
volume
·Swipe up/down on the left side of the
playback window to quickly adjust the
brightness
·Swipe left/right in the playback window to
rewind or fast forward
·Zoom in or out with GMD gesture controls
3. FAQ
1) How to fast forward or rewind?
①Press and hold in the playing window
and drag the progress bar forward or
backward to the target position.
②Click the target position you want to play
on the progress bar.
VIDEOS
③Swipe left/right in the playback window.
2) Can I speed up or slow down the playing
speed? How to do?
3) If shuts down unexpectedly during
playing, after restarting, can the player
continue to play from where it stopped
last time?
Yes, you can. Click the icon 1X in middle of
the playing window and drag the
speed-bar or click “+ / -” to change the
playback speed. If the icon is not found,
click > to expand the icon set.
Yes it can. It supports resume playback.
When you come back again, you will get
the prompt "Continue from where you
stop START OVER". Unless you select
"START OVER", it will resume playback by
default.
4) My video has audio tracks in dierent
languages, such as English, Portuguese,
can I choose one of them to play.
Yes. Please click the icon in the playing
window, and then select the target audio
track in the pop-up window.
Gallery
1. About the page of albums management
Click the Gallery app on the player’s desktop
to enter the page of albums management.
Here,
1) All folders will be displaying, click to open
any folder if needs.
2) The default view is “Albums”. If the pictures
are grouped by location or time, click the
icon in the menu bar at the top of the
window to select the view mode of
Locations or Times
3) Click the icon in the upper right corner,
·Select one or more albums: Manually touch
·Select all albums: Click the "Select all"
option from the icon at the top of the page.
·Deselect: Click the "Deselect all" option from
the icon at the top of the page.
·Sharing: Click to share by Bluetooth when
folders been selecting.
·Delete: Click the icon when folders been
selecting.
and click "Select album" to activate the
selection menu bar. Then multiple or all
albums can be selected to share or delete.
Gallery
2. About the page of pictures management
Click a folder in the page of album manage-
ment to enter the page of pictures manage-
ment. All photos in the folder will be
displaying here. In this page:
1) View selection – Click at the top of the
window, “Filmstrip view” or “Grid view”
can be chosen.
2) Slideshow -- Click in the upper right
corner and click "Slideshow" in the pop-up
menu to automatically display photos one
by one.
3) Select item -- Click in the upper right
corner and click "Select item" to activate
the selection menu bar. Then multiple or
all photos can be selected and edited.
·Select one or more photos: Manually touch
in “Select item” mode.
·Select all photos: Click the "Select all" from
the icon at the top of the page.
·Deselect: Click the "Deselect all" from the
icon when all photos been selecting
·Sharing: Click to share photos by
Bluetooth when photos been selecting.
·Delete: Click the icon, and then select
Gallery
3. Edit Pictures
Click a picture in the page of pictures
management:
·Share: Click to share to other devices by
Bluetooth.
·Delete: Click the icon in the upper right
corner, and then select “Delete”.
·Edit: Click the icon in the lower left corner,
or select “Edit” in the upper right menu to
open the edit page. Then Style, Color
Saturation,Shadow, Exposure, Contrast,
·Rotate: Click the icon, and then select
“Rotate left” or “Rotate right” to rotate the
photos in batch when photos been select-
ing.
Corp: Click the icon, and then select “Corp”
for adjust size of photo.
Set picture as: Click the icon, and then
select “Set picture as” for a wallpaper.
Details: Click the icon, and then select
“Details” for details information.
4) Group by -- Click "Group by" from in the
upper right corner, photos can be grouped
by location or time.
Gallery
4. FAQ
1. How to zoom in or out of pictures?
The player provides GMD gesture control
function, which allows image zooming
through 2 fingers gesture.
Stretching, Mirroring of the current picture
·Rotate: Select “Rotate left” or “Rotate right”
in the upper right menu to rotate the current
photos.
·Crop：Select “Crop” in the upper right menu,
then adjust the size of the crop box, click
save to crop the current picture
·Set picture as: Select “Set picture as” in the
upper right menu to set the current picture
as wallpaper.
·Details: Select “Details” in the upper right
menu to view information of the current
picture, such as width, Height, Size, Path,
Create time. can be modified.
Ebook
1.Know the main interface of Ebook
Click the Ebook app on the player desktop
for the first time to enter the main interface,
and a pop-up window will show the
entrances of 5 modules：
2. Know the page operation layout
Open a book through the Ebook app for the
first time, it will ask you to choose a page
operation layout you are used to. There are
11 options in total. It determines the trigger
area corresponding to Page up, Page down,
Options, Bookmarks on the page when
reading. For example, click on the right side
of the page to jump to the next page, or click
on the middle of the page to pop up the
options task bar.
·Recent list -- Manage the books you have
read recently
·My Shelf -- Manage your favorite books
·My Files -- Manage your local and network
folders
·Net Library -- Manage your online library
·Bookmarks – Manage all Bookmarks, Note,
Highlight, etc.
Ebook
3. About Options and Reader bar
In the page operation layout, the options
function is usually located in the middle area
of the page. So when reading, tap the
middle of the page to quickly pop up the
Reader bar. When the options is triggered for
the first time, the app will pop up a window
to let you customize the buttons of the
reader bar. You can tick the items you need.
Using reader bar, you can get a better
reading experience.
Screen Orientation – Switch to horizontal
/ vertical screen display
Day / Night mode -- Switch to Day
theme / Night theme
Speak -- Activate TTS voice reading
(Need voice engine support)
Autoscroll -- Activate automatic
scrolling, and no need to turn pages
manually
Bookmark -- Add the current page as a
new bookmark.
Chapters -- Manage the chapters and
bookmarks of the book, through which you
can quickly click to access the target
chapters or bookmarks.
Ebook
Brightness - Adjust brightness and
enable blue-light filter.
Font Size -- Adjust font size.
Search – Search for text in the current
book.
Allow tilt device to turn page - Turn on
or o the function of turning pages by tilting
the device.
Visual Options -- Provide more text and
page adjustment options, such as font, font
size/color/style, background color,
paragraph spacing, line spacing, etc.
Control Options -- More options for page
operation and screen control. Such as
defining the action of clicking, sliding,
long-pressing, etc.
Miscellaneous -- More reading auxiliary
settings, such as full screen mode,screen
awake, automatic scrolling mode.
Options -- More page adjustment and
control options. It is equivalent to the
shortcut button of the menu in the upper
right corner of the page.
Shutdown -- Exit Ebook
-- Add background color to selected text
-- Underline selected text
-- Add strikethrough to selected text
-- Add wavy-underline to selected text
·Copy -- Copy selected text
·Highlight -- Highlight selected text
·Note -- Annotate selected text
·Wikipedia -- Jump to Wikipedia to view
the selected text.
·Google -- Jump to Google to search for
the selected text.
Tips:
·You can change the range of the selected text by dragging
the cursor.
·You can click on the color block to change the preset color.
·To cancel the above text processing, just click the button in
the column.
Ebook
4. FAQ
1. How to select text in the book to copy,
annotate, highlight or add special
processing?
In the reading page, long press the
target text, the app will pop up an option
window, you can do:
Ebook
2. Can I quickly locate a chapter or page of
the book?
Yes it is. You can do it in the following
ways:
1) Click the Options area of the page to
trigger the reader bar, and then drag
the reading progress bar to the target
position, or click < > to jump page by
page or chapter by chapter.
2) Click the icon of the Reader bar, and
click to select the target chapter or
bookmark (if available).
Recorder
1. About the page of recorder
Click the Recorder app on the player’s
desktop to enter its main operation interface.
Here, you can do:
1) How to delete/delete in batch recording
files?
Click the icon to open the recording
list, and long-press any recording to
activate the check box, check the
/ -- Start/pause recording
-- Stop recording. After clicking, you can
choose “Discard” or “Save” the current
recording.
/ -- Play/pause the current recording
-- Recording list, where the recordings
are saved.
Click the icon in the upper right corner, you
can also:
· Voice quality：Select “voice quality”, you
can set it to “High” or “Mid”.
· Recording mode: Select “Recording mode”,
you can set the use occasion for recording,
such as Normal, Meeting, Lecture.
Recorder
recording that needs to be deleted, and
then click the icon below.
FM Radio
1. About the FM Radio.
Click the FM Radio app on the player’s
desktop to enter its main operation interface.
Here, you can do:
-- Channel list. Save all channels that
have been searched. Click the icon in the
upper right corner of its window to refresh
the channel list. Click the icon to the right
of each channel to mark it as favorites
-- Stop the FM Radio
/ -- Stop the FM Radio
</> -- Manually adjust the frequency to
search for channel
-- Click it to mark the current channel as
favorites.
-- Click it, you can choose Earphone or
Speaker as the audio output device. (the
wired earphones is still required to be
connected as the antenna).
-- Click it and you can make FM recording.
Only 2 options available: Start recording,
Saved recording
FM Radio
2. FAQ
1) Can I edit the name of my favorite
channel.
Yes. When clicking the icon to mark the
channel as favorites, click the icon in
the popup and select “Rename”, then
enter a name and save.
Clock
1) ALARM
① Add a new alarm:
1. About the page of Clock
Click the Clock app on the player’s desktop to
enter here, 4 clock-related modules will be
shown.
Click the icon at the bottom of the
window, it will jump to the "HH" dial by
default, move the hour hand on the dial
to the target position with your finger
and let go. Then it will automatically
jump to the "MM" dial, move the minute
hand to the target position in the same
way and let go. Then click to select AM
or PM, then click “OK”.
② Add Repeat date/Cesium/label for
alarm clock
Click the button under an alarm
clock to expand the setting item:
·Repeat -- Check the “Repeat” option,
then click on weekdays that do not
* Click the HH: MM field above the dial to return to
readjustment
* If you prefer keyboard input, click the icon in the
lower left.
Clock
need to be repeated to uncheck it.
· Default (Cesium) – Click it, then
select the one you like in the pop-up
ringtone library.
· Lable -- Click "Lable" and enter
the label text,click "ok". It is usually
used to indicate the purpose of alarm
clock.
· Delete – Click it to delete the
current alarm clock.
③ Enable/Disable alarm clock
Click the button on the right side
of the alarm clock to enable/disable
the alarm clock;
④ More settings
Click the icon in the upper right corner
of the window, and select “Settings”,
You can get more alarm settings, such
as Style, Home time zone, Alarm
volume, Snooze length, etc.
2) CLOCK
Here, you can add time zones for
multiple cities and make them appear in
the window. Click the icon at the
Clock
3) TIMER
① Add a new timer
a. Click the number in the numeral
dial to set the timer time, and then
click to start.
b. Click “ADD TIMER” in the timer list to
add and run multiple timer.
② Label a timer
Click “Label” tag above a timer to add
a label to the timer to explain the
purpose of the timer.
③ Increase the duration of the timer
For a running timer, click the button
“+1:00” in middle of the timer to add 1
minute to it each time.
④ Pause or Resume timing
Click the button / below to pause
the timer or resume it.
bottom, and then tick the city you want
to display.
Tips: you can find the target city by scrolling the screen or the
search button .. The time zone list is sorted alphabetically
by default. You can also click the icon in the upper right
corner and select Sort by time.
Clock
⑤ Reset a timer
For the timer in the paused state, click
“RESET” in middle of the timer to
return to the initial state and restart
the timer.
⑥ Delete timer
Click “DELETE” key in the lower left
corner to delete the current timer.
4) STOPWATCH
① Start / Stop stopwatch：Click the
button / to start or pause
stopwatch.
② Record a point in time：During
running, each time you click on “LAP”
key in the lower right corner, a time
point will be recorded.
③ Reset stopwatch: Click on “RESET” key
in the lower left corner of the stopped
stopwatch to reset the stopwatch.
File transfer
1. Know the main interface of MiniShare
Click the “File transfer” icon on the
player’s desktop to run the MiniShare
app. This app is mainly used for file
transfer between smartphone and G1
player. On the main interface, you can
see the following function icons.
1) -- Click the icon in the upper left
corner, you can do in the pop-up
window:
① Edit the device avatar: Click the icon ,
and click the “Modify” button, then
select “Select from gallery”. Find the
target picture in the gallery and click it
(If necessary, If necessary, you can
adjust the size of the clipping box to
select a part of the picture）, and
then click the SAVE button in the upper
left corner.
② Edit the device name: Click the default
device name or on the right side of
the avatar, enter new name and click
OK
*The personalized avatars and names allow you to
better identify your device in the search radar.
File transfer
2) -- Click the icon in the upper right
corner, you can get dierent menu
options:
① Connect to Zapya -- Guide you how
to connect to Android device/Apple
device/PC/Windows device
③ Name WIFI hotspot: Click the button
on the right of "Name WiFi hotspot
with nickname" under “Settings”, you
can switch the hotspot name from the
default d2b68RGRkZGZk to your
device's nickname to better identify
your device.
④ Set connection password: Click the
button on the right of "Set connec-
tion password" under “Settings”, and
enter the 8-character alphanumeric
password, then click ok. This makes it
necessary for others to enter the
password when they want to connect
to your device.
⑤ Set default storage：Click the button
> on the right of "Default Storage"
under Settings, You can specify
internal storage or external storage as
the default storage for receiving files.
File transfer
② Set WiFi Options -- You can set the
WiFi type used to establish the
connection as WiFi Direct or WiFi
Hotspot, and set a password for the
hotspot. And you can also choose
whether the WiFi channel is 5G or 2.4G.
3) / -- Click the icon or in the
middle of the window, you can switch
the file transfer mode to Send/Receive
(one-way) or Group.
4) -- Click the “ history” button, you
can view all historical sending and
receiving records.
5) -- Click the“ Local File” button,
you can view the photos, videos, and
music in the local folder.
Here, you can also quickly share them
with friends follow the steps below.
① Click the check-box behind the file to
select the photo/video/audio that
needs to be shared.
② Then click the “Share” button at the
bottom of the window, a QR code will
pop up and create a Group named
after the device name.
File transfer
③ Next, you have 2 ways to establish a
connection to transfer files.
·Scan QR code: For iPhone, please
install and open ZapyaGo app on your
phone and scan the QR code. Then,
click “Go to Settings” to jump to the WIFI
settings of your iPhone, and set the
currently connected WIFI to the hotspot
of G1 (If you have set a hotspot
password, you will be asked to enter it).
Then return to ZapyaGo to start
transfer; For Android phones, Please
install and open MiniShare app on your
phone and scan the QR code. The app
will automatically start transferring
files.
·Join in Group: For Android phones,
open MiniShare and click the iconto
switch to Group mode, then select “Join
Group”, you will find the group created
by the G1 player in the search radar,
click it to join (If you have set a hotspot
password, you will be asked to enter it)
and start transfer.
File transfer
2. FAQ
1. How to get MiniShare or ZapyaGo App?
·For Android Cellphone
Please scan the following QR code to
download and install MiniShare.
Minishare for Android
·For iPhone
Please search for “Zapya Go” in the
App store or scan the following QR
code to download and install.
File transfer
ZapyaGo can only be used to transfer pictures and
videos those in the Photos App, not to directly transfer
music from iPhone.
Zapya Go for ipone
2. How to transfer files between cellphones
and G1 players?
·For Android:
·For IOS:
① iPhone G1 Player
a. Click the “File transfer” icon on the
Please refer to the "Transfer from your
phone" topic in the "How to Transfer
Music or Video" section.
File transfer
desktop of the G1 player to open the
MiniShare App. And click the icon in
the middle of the window to switch to
Send/Receive mode, and then click
the "Receive" icon, and the device will
start hotspot and pop up a QR code
for scanning.
also click the icon in the middle of
the window to switch to Send/Re-
ceive mode, click the "Send" icon,
then select the photos or videos to be
transferred, and click the "Send"
button that pops up below. Next, click
"Scan to connect now" in the pop-up
window to activate the camera
scanning function, and scan the QR
code on G1 player.
b. Open the ZapyaGo on iPhone, and
Click “Go to Settings” to jump to the
WIFI settings of your iPhone, and set
the currently connected WIFI to the
hotspot of G1 (If you have set a
hotspot password, you will be asked
to enter it). Then return to ZapyaGo,
and the app will starts uploading files
to the player.
c. According to the pop-up prompt,
File transfer
② iPhone G1 Player
a. Click the “File transfer” icon on the
desktop of the G1 player to open
the MiniShare App. And click the
icon in the middle of the window to
switch to Create Group/Join mode,
and then click the "Create Group"
icon, and the device will start
hotspot and pop up a QR code for
scanning.
b. Open the ZapyaGo on iPhone, and
also click the icon in the middle
of the window to switch to Join
mode, click the "Join" icon, Next,
click "Scan to connect now" in the
pop-up window to activate the
camera scanning function, and
scan the QR code on G1 player.
c. According to the pop-up prompt,
Click “Go to Settings” to jump to the
WIFI settings of your iPhone, and
set the currently connected WIFI to
the hotspot of G1 (If you have set a
hotspot password, you will be
asked to enter it). Then return to
Zapya Go, The mutual connection is
File transfer
successfully established. In this
way, you can either transfer files
from iPhone to the player, or
transfer files from the player to
iPhone.
File Manager
In page of file manager, files have been
classified by format, including Music,
Videos, Picture, Apks, Document, Zips,
Recent, Favorites, All. If a quick check needs,
click to Search files.
Click device storage for files listing view
1. New folder: Click the icon for create a
new folder at listing.
2. Search: Click the icon for file searching
by enter part of the file name.
3. Sort by: Click the icon Arrange files by
Name/Size/Date/Type.
Multiples folders/files selection and features
1. Multiples folders/files selection: long press
the file or folder
1) Selection all / Deselect all: Click icon
right top of the page.
3) Copy, Cut and Paste -- Click the icon
2) Share -- Click the icon at the bottom
of the page share to other devices by
MiniShare or Bluetooth when files being
selected (folders unable to be sharing
by this feature but files).
/ at the bottom of the page for
copy/cut files when files being selected.
Then find the folder where they should
paste into, and click “PASTE”.
right corner and click "Rename" to edit
the name of the file or folder when a
target file or folder being selected.
File Manager
4) Delete -- Click the icon at the bottom
of the page when files being selected.
5) Rename -- Find the icon in the lower
lower right corner and click "Add to
Favorites" to add the file or folder to
your favorite list when a target file or
folder being selected.
6) Add to Favorites: Find the icon in the
right corner and click "Compress" to
compress file or folder when file or
folder being selected.
7) Compress: Find the icon in the lower
right corner and click "Details" to
review the details of file or folder
when file or folder being selected.
8) Details: Find the icon in the lower
3) Clear events: Click the icon in the upper
2) Add New event: Click the icon in the
Calendar
In the calendar page, functions provided
belows:
1) Switch calendar view: Click the icon
at the top of the page to switch the view to
Day, Week, Month, and Agenda.
right corner, select “Clear events”, select the
account ((default is PC sync) that needs to
delete the event, and click “OK”. All the
events in selected account will be deleted.
4) Search events: Click the icon in the upper
right corner, select “Search”, and enter the
keyword of the event by click .
upper right corner, select “New event”, enter
the event name, location, time period, time
zone, reminder and other information, and
then click the “DONE” button. After the event
is created, the date related to the event will
be marked with overline.
Other apps
Other third-party apps
Please refer to their website or the help file in
the Apps. Including: Spotify, Pandora,
Deezer, TIDAL, Apple music, Amazon music,
Audible, Amazon kindle, Facebook, Twitter,
etc.
Apps & Notifications
Settings
Network & Internet
·Wi-Fi: Wi-Fi connecting selection.
·Data usage: Details for data usage.
·Hotspot & tethering: Sharing Wi-Fi
single via USB cable and Bluetooth
to other devices.
·Recently opened apps: History for
running state of apps.
·Notifications: Adjust permissions of
app notification showing.
·App permissions: Adjust permis
sions of app, such as using location,
microphone…
Connected devices
·Bluetooth: Bluetooth connecting
selection.
·USB: Use USB to
- Charge this device
- Transfer files
- Transfer photos (PTP)
- Use device as MIDI.
Settings
Battery
·Charge and usage information of
Battery:
1. Last full charge;
2. Screen usage since full charge.
·Power management
Display
·Brightness level: A control bar for
brightness of screen adjustment.
·Night Light: Setting a schedule for night
light status and adjust intensity of
brightness.
·Wallpaper: Pictures of wallpaper
selection.
·Sleep: After (arrange) minutes/seconds
of inactivity, screen will be turn o.
- Standby intelligent power saving
- Battery percentage: Show battery
percentage in status bar.
- Sleep: After (arrange) minutes/sec
onds of inactivity, screen will be
turn o.
Settings
Sound
·Media volume: A control bar for Media
volume adjustment.
·Alarm volume: A control bar for Alarm
volume adjustment.
·Ring volume: A control bar for Ring
volume adjustment.
·Do Not Disturb Preferences: Setting app
and schedule for do not disturb rules.
Storage
Display the available space and total
space of internal storage and SD card,
as well as the occupancy of each App.
DuraSpeed
Setting permission to allow APPs
running in background.
Security & Location
·Device security：Setting a screen lock
by Pattern, PIN, Password
Warning: When you set a password or PIN, be sure to
write down it before you click Confirm.
Otherwise, you will not be able to access the
device.
Settings
·Privacy
- Location: Setting permission to allow
APPs tracking your location.
- Show passwords: Display characters
briefly as you type.
Users & Accounts
Manage accounts of APPs or Device.
Accessibility
·Display
- Font size: Adjustment of font size.
- Display size: Adjustment of display
size.
- Magnification: Setting an action for
function of zoom.
- Color correction: Adjustment of color
of screen.
- Color inversion
·Interaction controls
- Touch & hold delay: short/mdum/long
can be chosen.
·Experimental
- High contrast text: on/o
Settings
System
·Languages & Input: Setting languages
and input method.
·Date & Time: Setting time of device.
·Reset locked: Lock the reset option to
prevent others from resetting the device
·Reset options: Reset WiFi, Bluetooth,
App preferences, even reset to factory
settings.
·About device: Detail information of
device.
Common faults and Solutions
1. The player can’t be charged.
In the o state, when the USB cable is
connected for charging, The player will
normally light up and display a battery logo
and remaining charge.
Troubleshooting:
1) Check whether it is caused by poor
contact.
In most cases, charging failure is caused
by poor contact. You can repeatedly plug
and unplug the USB cable to test whether
the charging can be resumed. If it can be
charged at a certain moment, it indicates
that there is poor contact.
2) Check whether USB port is damaged
Connect the player to a computer with an
available USB port by using a proven USB
cable. If the fault persists, it indicates USB
port of the player has been damaged.
3) Check if the USB cable is damaged.
·You can also use the USB cable to try to
·You can replace a proven USB cable to
connect the player to check whether it can
be charged. If it can, it means that the
previous cable has been damaged.
Common faults and Solutions
Tips: If turned o and not used for a long time (more than
3 months or even longer), the player may not be able to
turn on or be charged. This is usually an illusion caused
by the device being in an over-discharge protection state,
rather than a real failure. In this case, please make sure to
charge it for at least 2 hours before trying to turn it on.
charge other devices, such as cellphones,
to check whether it can charge other
devices. If not, it means also that the
cable has been damaged.
If it is confirmed that both the USB cable
and the charging port are normal, it can
be determined that it is the fault of the
player itself. Please contact after-sales
support for replacement or refund.
2. Nothing happens when the player is
connected to computer with USB cable.
Troubleshooting:
1) Check whether it is caused by poor contact.
In most cases, such failure is caused by
poor contact. You can repeatedly plug
Usually, use a USB cable to connect the
player to the computer, an MTP device
named G1 will appear in the device and
drive list of your computer.
Common faults and Solutions
2) Check whether the USB port is damaged
and unplug the USB cable to test whether
the connection can be resumed.
Connect the player to a computer with an
available USB port by using a proven USB
cable. If the fault persists, it means USB
port of the player has been damaged
3) Check if the USB cable is damaged.
·You can replace a proven USB cable to
·You can also try to use the USB cable to
connect other devices. If there is also no
response, it means also that the USB
cable has been damaged.
connect the player to Check if the
connection can be restored. If it can, it
means that the previous cable has been
damaged.
3. FM radio cannot be turned on.
The FM radio needs to be plugged into a
wired headset/headphones as an antenna
to turn on. If the headset is plugged in and
the fault persists, it is likely that the 3.5mm
port is in poor contact. Please replace one
headset and try again.
Common faults and Solutions
5. How to take screenshots?
Press and hold the volume down button and
the power button at the same time for 2
seconds. You can find your screenshots in
Pictures--Screenshots in the device storage.
4. I want to delete some unnecessary apps,
how to do it?
Long press the App you want to delete on
the desktop, next click on the “App info” or
the icon in the pop-up window, then select
6. How to clear apps running in the
background?
Long press the Home button of the device,
and swipe right or left one by one in the
pop-up application list to clear the program.
“UNINSTALL” and “OK.
Warning:
·Deleting the app is irreversible. Unless you reset the
device to factory settings. Please be cautious.
·Some Android built-in APPs cannot be delete or
uninstall, such as music, clock, calculator, etc..
Common faults and Solutions
7. How to set up parental controls?
G1 player does not allow the installation of
other applications, which has largely
prevented children from downloading or
installing inappropriate apps at will. For
some pre-installed apps, if you mind it and
don't want your kids to use them, you can
uninstall them first, then go to Settings >>
System >> Reset locked and set a password.
That way, the reset option will be locked and
your kids won't be able to use it to restore
apps you uninstalled.
Specification
Bluetooth version：4.2
Product Size: 4.3 x 2.4 x 0.4 inch
Weight: 4.5 oz
Screen Size: 4.0 inch
Battery Capacity: 1500mAh
Input: 5V=2A
Charging Time: 70 Minutes
Internal Memory: 2G RAM+16GB ROM
Music Playtime: 35 hours
Video Playtime: 5 hours
Expansion slot: Micro SD/TF Card (up to 1 TB)
Music format：MP3, WAV, FLAC, APE, OGG,
M4A, AAC, WMA, MP2
Video format: AVI, MKV, MP4, MPEG, MOV,
VOB, WMV, WEBM, DIVX, F4V, FLV, XviD, 3GP
Photos format: JPEG, BMP, GIF
Ebook format: EPUB, TXT, PDF, DOCX, FB2,
MOBI
Recording format: ogg
FM Receiving Frequency: 87.5 MHz ~ 108 MHz
Warning
>>Do not leave the device in an environment
>>Do not use the equipment under thunder
storm weather;
>>Do not place the device in the water for a
long time;
>>Do not expose the equipment to the sun
for a long time.
where the temperature is too low or too
high (below -10°C or above 50°C) for a
long time. Extreme temperature
environments will cause the device to
deform and shorten the service life of
the device;
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment. This equipment
has been tested and found to comply with
the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be deter-
mined by turning the equipment o and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving
antenna.
‐‐ Increase the separation between the
equipment and receiver.
FCC Warning Statement
‐‐Connect the equipment into an outlet on a
circuit dierent from that to which the
receiver is connected.
‐‐ Consult the dealer or an experienced
radio/TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Thedevicehasbeenevaluatedtomeet
generalRFexposurerequirement.
FCC Warning Statement
Warranty
Thank you for purchasing our products. You
will enjoy the following services when using
this product.
Warranty period: Within one year from the
date of sale.
Warranty scope: Limited to the product host.
Warranty terms:
① Within 1 year after purchase, failure or
damage caused by product quality
problems can be replaced for free or full
refund.
② Accessories are not included in the
warranty, such as usb cable, earphones,
etc., but if quality problems occur within 7
days after purchase, they can be replaced
for free.
③ The following conditions are not covered
by the warranty
·Out of the warranty period.
·It has been disassembled or repaired
privately by the customer.
·Man-made damage, accidental damage
or deformation.
·Failure caused by installation and use in
abnormal environments such as high
Warranty
temperature, high pressure, and
humidity..
·Damage caused by natural disasters
such as lightning strikes, floods, and
earthquakes.
Contact us
Email: innioasis-csc@hotmail.com
Online support:
https://www.facebook.com/innioasis/
We promise to reply you as soon as
possible within 24 hours.
