Loading ...
Loading ...
Loading ...
TROUBLESHOOTING GUIDE
PROBLEM CAUSE CORRECTION
Engine will not .............................................................................................................................................
start (see Engine Low oil (if equipped with low oil Add required amount of oil
Manual for shutdown).
further engine
troubleshooting)
Not primed or choked. Push primer bulb 3 times or
choke engine.
_park plug wire _ Attach spark plug wire.
Engine ON/OFF switch in OFF po-
sition (If applicable.)
Fuel valve closed (if equipped)
Place engine ON/OFF switch in
on position.
Move the fuel valve lever to the
"Open" position.
w_d _#_i_ #igbp_ess_re
ii /ii Iii : i)_theiO_e_t_niS_tio_i%iiiiiiii!i ;
Low water supply, Water supply must be at least 5
GPM @ 20 PSL
......... ........................................if nb_bSsary.
Nozzle obstructed. Clean nozzle with paper clip or
nozzle cleaning tool, pour water
into nozzle end to flush out ob-
struction.
Wate_ fi tbr s_-ee_ 0logged Rbmo_ and blean _iitbr.
Air in hose. Turn off the engine, then the
water source. Disconnect the
water source from the pump inlet
and turn the water source on to
remove all air from the hose.
When there is a steady stream of
water present, turn water source
off. Reconnect water source to
pump inlet and turn on water
source. Squeeze trigger to re-
move remaining air.
Gh_ e_in_h_iC_b! _S_ _h ...................Move ¢hQke _6th ..............Choke
Throttle control lever is not in the Move throttle control lever to the
"Fast" position. (if equipped) "Fast" position.
No or low
pressure
(initial use)
D25803 16- ENG
Loading ...
Loading ...
Loading ...