Loading ...
Loading ...
Loading ...
6
2. Important Safety Warnings
2.8 Operation
Do not disconnect the earth conductor cable on the UPS or the building wiring terminals at any time, as this will cancel the protective
earth of the UPS system.
In order to fully disconnect the UPS system, first press the “OFF” button and then disconnect the mains.
Ensure that no liquid or other foreign objects can enter into the UPS system.
2.9 Standards
*Safety
IEC/EN 62040-1
*EMI
Conducted Emission...............................:IEC/EN 62040-2 Category C3
Radiated Emission..................................:IEC/EN 62040-2 Category C3
*EMS
ESD......................................................:IEC/EN 61000-4-2 Level 4
RS........................................................:IEC/EN 61000-4-3 Level 3
EFT.......................................................:IEC/EN 61000-4-4 Level 4
SURGE..................................................:IEC/EN 61000-4-5 Level 4
CS........................................................:IEC/EN 61000-4-6 Level 3
Power-Frequency Magnetic Field..............:IEC/EN 61000-4-8 Level 4
Low-Frequency Signals............................:IEC/EN 61000-2-2
WARNING: This product is intended for commercial applications. Installation restrictions or additional precautions may be
needed to prevent disturbances.
3. Installation and Setup
3.1 Unpacking and Inspection
Unpack the unit and inspect the contents. The shipping packaging contains:
• One (1) UPS
• One (1) Owner’s Manual
• One (1) Parallel Cable (For SVT20KX and SVT30KX model)
• One (1) Share Current Cable (For SVT20KX and SVT30KX model)
Note: Do not turn on the unit. Be sure to inspect the unit prior to installation. Be sure that nothing inside the package was damaged during transportation.
Notify the carrier and dealer immediately if there is any damage or missing parts. Please keep the original packaging in a safe place for future use.
Loading ...
Loading ...
Loading ...