Loading ...
Loading ...
Loading ...
6
ENG
INSTALLATION OF COOKTOP
Technical features
You can operate electric cooktops by turning the button on control panel you want to use to the level you desire.
Cooktop powers as per levels are given in the following table.
Specifications Level 1 Level 2 Level 3 Level 4 Level 5 Level 6
80 mm hotplate 200 W 250 W 450 W --- --- ---
145 mm hotplate 250 W 750 W 1000 W --- --- ---
180 mm hotplate 500 W 750 W 1500 W --- --- ---
145 mm rapid hotplate 500 W 1000 W 1500 W --- --- ---
180 mm rapid hotplate 850 W 1150 W 2000 W --- --- ---
145 mm hotplate 95 W 155 W 250 W 400 W 750 W 1000 W
180 mm hotplate 115 W 175 W 250 W 600 W 850 W 1500 W
145 mm rapid hotplate 135 W 165 W 250 W 500 W 750 W 1500 W
180 mm rapid hotplate 175 W 220 W 300 W 850 W 1150 W 2000 W
180 mm ceramic heater 1800 W
140 mm ceramic heater 1200 W
140 / 250 mm ceramic heater 1800 W
120 / 180 mm ceramic heater 1700 W
220 / 300 mm ceramic heater 2400 W
Supply voltage 220-240 V AC / 380-415 V 3N AC 50/60 Hz.
WARNING!
WARNING!
• For the modification to be done by authorized service, this table should be considered. Manufacturer may not
be held responsible for any problems rising because of any faulty modification.
• In order to increase the product quality, the technical specifications may be changed without prior notice.
• The values provided with the appliance or its accompanying documents are laboratory readings in accordance
with the respective standards. These values may differ depending on the use and ambient conditions.
• It is customer’s responsibility to prepare the location the product shall be placed on and also to have the
electrical installation prepared.
• The rules in local standards about electrical installations shall be followed during product installation.
• Check for any damage on the appliance before installing it. Do not have the product installed if it is damaged.
Damaged products cause a risk for your safety.
Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation
is not suitable, call an electrician and plumber to arrange the utilities as necessary. Manufacturer shall not be held
responsible for damages caused by operations performed by unauthorized persons.
Loading ...
Loading ...
Loading ...