Loading ...
Loading ...
Loading ...
4
ENG
Methods for Protecting Ceramic Glass Cooking Surface
Intended Use
Ceramic glass surface is unbreakable and scratch
resistant to a certain degree. However, to avoid any
damage, please do the following:
1. Never pour cold water on hot cookers.
2. Do not stand on a ceramic glass plate.
3. Sudden pressure, for example, the effect of a
falling salt shaker may be critical. So, do not place
such objects on a place above the hobs.
4. After each use, make sure that the base of the
cooking pot and surfaces of cooking zones are
clean and dry.
5. Do not peel vegetables on the hob surfaces. Sand
grains falling from the vegetables may scratch the
ceramic glass plate.
6. Do not lay flammable materials such as cardboard
or plastic on the oven. Objects such as tin, zinc,
or aluminium (as well as aluminium foils or empty
coffee pots) may melt on hot cooking surfaces and
thus cause damage.
7. Take care not to let sugary foods or fruit juices
contact the hot cooking zones. The ceramic glass
surface may be stained by these.
1. This product is designed for home use.
Commercial use of the appliance is not permitted.
2. This appliance may only be used for cooking
purposes. It shall not be used for other purposes
like heating a room.
3. The manufacturer assumes no responsibility for
any damage due to misuse or mishandling.
4. Operational life of the product you have
purchased is 10 years. This is the period for
which the spare parts required for the operation
of this product as defined is provided by the
manufacturer.
Electrical Connection
1. Setting conditions of this appliance is indicated in
tag or data plate.
2. Your appliance should be plugged in a fuse
appropriate for electric power. If necessary, it
is recommended that installation is done by
authorized service.
3. Your appliance is configured in accordance with
electrical supply of 220-240 V AC / 380-415 V 3N
AC 50/60 Hz.
4. If main electrical network is different from these
values, contact with your authorized service.
5. Electrical connections of your appliance should
only be made to the fuses having suitably wired
grounding (grounded) system. If no convenient
fuse is available in the place where your appliance
is to be installed, contact with authorized service
immediately. Manufacturing firm is not responsible
definitely for the damages that fuses whose
grounding is not made and connected to the
appliance can cause.
6. Plug of the appliance should be close to be
accessed easily to the fuse whose grounding is
made without use of extension cord.
7. Do not allow contacting the power cable of your
appliance with hot regions. Similarly, keep away it
from sharp edges and corners.
8. If feeder cord is damaged, this cord should be
replaced either by manufacturer or its service
agency or same degree qualified personnel in
order to hinder a dangerous situation.
9. Wrong electrical connection may give damage
to the appliance.In this case, your appliance
will remain out of guarantee scope. Electrical
connection of your appliance should be done by
authorized service.
Loading ...
Loading ...
Loading ...