Loading ...
Loading ...
Lost combination or keys
IMPORTANT: Please read the following instructions
carefully. For your protection, new keys CAN, and
c
ombinations CANNOT, be issued by telephone request.
To order replacement keys and/or combinations, it is
essential that you MAIL the items listed in each
category below to Sentry Group with your order. If
you need assistance in preparing your order, or wish to
purchase via credit card (Visa/Mastercard only), please
call Sentry Customer Service toll-free Monday–Friday
at 1-800-828-1438, 8:00am - 8:00pm E.S.T.
Lost combination: First, find your safe’s Model and Serial
Number. The Serial Number is in this packet, and is also printed
on the small label beside the door hinge (outside). Send a copy
of this, a notarized letter (last name must be different than that
of owner) stating you are the safe’s owner, and a check or money
order for $12.00
* (U.S. funds) to: Sentry Group, Dept. 200,
882 Linden Avenue, Rochester, NY 14625-2784 USA.
If using a credit card (Visa/Mastercard only), call 1-800-828-1438
and fax your Model and Serial number with the notarized letter
to 585-381-2940.
Lost keys: To obtain replacement keys, find your safe’s
Model and Serial Number. The Serial Number is in this packet,
and is also printed on the small label beside the door hinge
(outside).
Order by Mail: Send the Model and Serial number along
with check or money order (U.S. funds) for $12.00
* to:
Sentry Group, Dept. 200, 882 Linden Avenue, Rochester,
NY 14625-2784 USA.
*
NOTE: Prices subject to change without prior notification.
IMPORTANT: For assistance in the event of lost keys or
combination, or for information on ordering extra
organizational features, please call us toll-free Monday-Friday
(8:00am - 8:00pm E.S.T.) at 1-800-828-1438, or visit us on-line
at www.sentrysafe.com.
Order by Internet: Visit our website at
www.sentrysafe.com. Go to our Customer Service Section.
WARNING
DO NOT store delicate items directly in your safe.
SentrySafe products which offer fire protection have a patented
insulation that has a high moisture content. In addition the
SentrySafe advanced safes close airtight to offer water
resistance, which may also cause moisture to accumulate inside
your safe. The desiccant packet included in your safe during
shipment, should be left in your safe.
DO NOT DISCARD IT.
It is intended to help absorb moisture which may accumulate
inside your safe.
If you choose to store delicate items such as jewelry with
working parts, watches, stamps, or photos in your safe, we
recommend putting them in an air-tight container, prior to
placing them in the safe for storage.
WARNING
DO NOT store pearls in this safe unit.
In the event of a fire, potential damage to delicate pearls ocurs
at temperatures much lower than the 350°F interior performance
measure which the UL classification performance standard
indicated guarantees. Therefore,
DO NOT store pearls in your
SentrySafe product.
IMPORTANT
Using a mechanical combination lock
NOTE: It may be required to push the bolt button which, in turn,
will throw the bolts to a locked position while the door is open
(Fig. G). Proceed to test your combination.
The handle should
be all the way UP, in the horizontal position before
attempting to dial out safe.
Your combination lock is now
ready to use. You will find your safe’s combination on the sticker
on the front of the owner’
s manual. Depending upon the model
you chose, you will have either a 3-number or 4-number
combination.
For safes with combination
and key lock
For added security, some models have a dual locking system
(combination lock plus key lock).
NOTE: The safe will lock if
key lock cylinder is pressed in
with or without key.
To unlock and open
B
efore dialing your combination, simply insert the key in the lock
and turn until the plunger pops out. Remove key.
To close and lock
You can relock the safe in two ways. With the door closed,
depress the key lock with your finger, or spin the combination
dial one full turn. For greatest security, do both. (Make sure the
door handle is in the horizontal position.)
Open unit first, then test
with door open!
(See cover of this manual for your combination.)
3-NUMBER COMBINATION
(Cannot be changed.)
Point the dial to zero.
Turn the dial to the left. Make sure ZERO passes the
pointer at least THREE times. Then stop at the first number of
your combination.
Turn the dial to the right. Stop the SECOND time you
reach the second number of your combination.
Turn the dial to the left. Stop the FIRST time the
pointer reaches the third number of your combination.
4-NUMBER COMBINATION
NOTE: Changing the combination voids your warranty
for assistance with lost combination and
locksmith services needed.
Point the dial to zero.
T
urn the dial to the left. Make sure ZERO passes the
pointer at least FOUR times. Then stop at the first number of
your combination.
T
urn the dial to the right. Stop the THIRD time you
reach the second number of your combination.
Turn the dial to the left. Stop the SECOND time you
reach the combination’s third number.
Turn the dial to the right. Stop the FIRST time you
reach the last number of your combination.
Questions?
T
o obtain instructions for changing your 4-number combination,
or for other assistance, contact Sentry Customer Service
on line at www.sentrysafe.com or call: 1-800-828-1438,
8:00am – 8:00pm E.S.T
., M–F
.
3
G
This product is not intended for the
secure storage of all materials.
Items such as firearms, other
weapons, combustible materials,
or medication should not be stored
in this unit.
WARNING
Loading ...
Loading ...
Loading ...