Loading ...
Loading ...
Loading ...
32
SETTING OVEN CONTROLS
Meat Probe
Use the probe feature for best results when cook-
ing foods such as roasts, hams or poultry, using a
probe to check internal temperature is the safest
method to ensure properly cooked food.
Before using the meat probe read the important
information listed here:
Setting the Meat Probe to stay on
1. Press and hold both the oven light icon and the
clock icon for 3 seconds.
2. Press the + or - keys until Prb and the probe
symbol appear. If the probe is OFF, press the + or
- key on either side of the OFF display to turn the
probe feature on.
3. After 3 seconds the control will accept the
change with an acceptance tone and fade the On/
O from the display.
The Probe will remain on and ready for use unless
the user repeats the steps and selects OFF.
IMPORTANT
• The probe feature must be set before setting
the cooking mode and oven temperature.
• If a timer is running when the meat probe
is plugged in, the control will sound a triple
beep once and the timer will keep running.
The timer must be canceled before the probe
temperature can be set.
• If the meat probe is plugged in during BROIL
or CLEAN, the oven will continue and ignore
the meat probe.
• If the meat probe is plugged in while the oven
is in a function that allows for the meat probe,
the control will display the meat probe icon
and enter meat probe progamming mode
and show the meat probe suggested target
temperature.
• If no cooking mode is selected within 30 sec-
onds of setting the target temperature, the
oven mode indicator light will stop blinking.
The display will continue to show the meat
probe settings until an allowable cooking
cycle is selected.
• When the meat probe is set correctly, the
control will signal an alert when the internal
food temperature reaches the desired set
target temperature. When active, the internal
food temperature is visible in the display
during the cooking process. This eliminates
any guesswork or the need to open the oven
door to check the thermometer.
NOTE
If the meat probe is plugged while the oven is in
a function which allows probe cooking, it may be
set the following way:
• The display will show the meat probe icon
and temperature 000°.
• The meat probe temperature can now be
set and the control will sound an acceptance
chime.
CAUTION
For best use and care of the Meat Probe, when
finished using this feature remove the Meat Probe
and reset the feature to the OFF position until
the next use.
Loading ...
Loading ...
Loading ...