Loading ...
Loading ...
Loading ...
30
Door does not lock during cleaning.
Use caution.
WARNING
• Cleaning Porcelain: Porcelain parts should be cleaned frequently with warm
soap and water solution applied with a soft sponge or wipe. Never use abrasive
powders or liquids! Do not leave acid or alkaline substances on the porcelain
parts (such as vinegar, lemon juice, salt, tomato sauce etc.) Use a rubber spatula
to remove fat residues.
• Cleaning Glass Door: Clean the glass using a non-abrasive sponge or wipe with
a warm soap and water solution. Use a rubber spatula to remove fat deposits.
Install the pins into slots on each hinge (pins not included.)
CHANGING DOORS
1. Open oven door and insert removal pins in door hinge. Close door half way.
Pull up and out on door to remove.
2. Uninstall the kick plate by unscrewing the four screws in the kick plate. There are
two at the top and bottom on each side. Have a helper tilt the range to unscrew
the bottom screws.
3. Remove kick plate.
4. Install new kick plate.
5. Reinstall the four previous screws from step 2.
6. Reinstall new oven door by reversing step 1. Place door hinges into slots of hinge
base receivers, keeping the door in half closed position. The door will drop into
the receiver base when proper engagement is achieved.
7. Open door to full open position slowly to verify proper operation. Remove hinge
pins.
MAINTENANCE AND CLEANING
Changing Doors
Changing
doors video
SCAN ME
Loading ...
Loading ...