Loading ...
Loading ...
Loading ...
41
CARE AND CLEANING
Inside
• Occasionally a waxy build-up may form
on the lint filter and/or moisture sensing
bars from using dryer-added fabric
softener sheets. To remove this build-up,
wash them with warm, soapy water. Dry
the filter thoroughly and replace. DO NOT
operate the dryer without the lint filter in
place.
• If the dryer drum becomes stained from
non colorfast fabrics, clean the drum with
a damp cloth and a mild liquid household
cleanser. Remove cleanser residue before
drying the next load.
• Before cleaning the dryer drum interior,
unplug the electrical power cord to avoid
electrical shock hazards.
DO NOT use any type spray cleanser when
cleaning the dryer interior. Hazardous fumes
or electrical shock could occur.
• Every 18 months a qualified service
professional should clean the dryer
cabinet interior, lint screen housing and
exhaust duct. These areas can collect lint
and dust over time. An excessive amount
of lint build-up could result in inefficient
drying and possible fire hazard.
Outside
• Clean the dryer cabinet with mild soap
and water. Never use harsh, gritty or
abrasive cleansers.
• If the cabinet becomes stained, clean with
diluted chlorine bleach (1 part bleach to 8
parts water). Rinse several times with clear
water.
• Remove glue residue from tape or labels
with a mixture of warm water and mild
detergent. Or, touch residue with the sticky
side of the tape or label.
Cleaning the filter
Clean the lint filter after every load. Lint
build-up on the filter restricts air flow, which
causes longer drying times. The filter is
located at the bottom of the door opening.
2. Press down the button on the top of
the filter to open the clamshell.
3. Gently clean the lint from the filter.
1. Remove the filter by pulling it straight
up from the dryer.
Cleaning the LuxCare
TM
Lint Shield
filter
4. Snap the filter closed and place back
into the dryer.
WARNING
To reduce risk of fire or serious injury to
persons or property, comply with the basic
warnings listed in the Important Safety
Information and those listed below.
WARNING
Clean the lint filter after every load.
CLEAN LINT will be displayed at the end
of the cycle to remind you to remove lint
from the filter.
IMPORTANT
• DO NOT open the clamshell filter
beyond the hinge limit.
• ALWAYS handle the clamshell filter by the
frame, not by the mesh material.
Loading ...
Loading ...
Loading ...