Loading ...
Loading ...
Loading ...
36
anti-static (on select models)
The anti-static option injects steam into
the clothing just before cycle completion to
reduce static.
dry boost
This option increases the drying effectiveness
for difficult loads. In conjunction with
Automatic moisture sensors and the dry
boost option may slightly decrease cycle
times.
Other features
LED display
MIN
CLEAN LINT
CALL
SERV ICE
chime
A signal will sound at the end of the cycle
(and periodically during extended tumble
or wrinkle release). To mute or unmute the
chime, press and hold the select button for
3 seconds.
options select
de-select
hold ‘select’ 3 s to mute/unmute
control lock
To lock the controls between cycles, scroll to
the control lock option and press select. The
control lock icon will show on the LED display.
To unlock the controls scroll to the control
lock option again and press select. Use this
feature to reduce the likelihood of accidental
operation by children. Dryer cycles will not
run when Control Lock is activated.
Icons may vary according to model.
extended tumble (on select models)
Select the extended tumble option if the
dried load might not be removed promptly
at the end of the cycle. The dried load will
tumble continuously without heat for 30
minutes. A chime will sound periodically to
remind you to remove the dried load.
delay time (on select models)
Use delay time to delay the start of the
drying cycle to a time convenient to your
schedule or during off-peak energy hours.
The start of any cycle can be delayed
for 30 minutes to 12 hours. After selecting
the delay time option, use the cycle button
leaf icon
This icon will appear on the console when
the dryer is using energy efficient settings.
These settings use less heat and longer
cycle times to dry. The dryer will always
default to the energy efficient Normal cycle
with the leaf icon displayed.
wrinkle release
The wrinkle release option helps prevent
wrinkles and tangling by tumbling the dry
load without heat for 5 minutes out of every
10 minutes. The 5 minutes on and 5 minutes
off is repeated for a total 45 minutes. A chime
will sound after each tumble as a reminder to
remove the dried load.
NOTE
It is not recommended to use fabric softener
sheets with steam cycles or steam options
as it may cause staining on clothes.
NOTE
When extended tumble and wrinkle
release options are both selected the
amount of time the load will tumble
without heat will increase to a period of
up to 75 minutes.
NOTE
While counting down during delay time,
you will notice your dryer periodically
tumbling for a few minutes without heat
to redistribute the load, maximizing load
freshness.
(models 300/400) or the cycle selector (models
500/600) to scroll to the desired delay time
and press start. The delay time icon will
illuminate on the LED display to indicate the
delay time option is activated, The delay
time will begin counting down on the LED
display once activated.
CONTROLS AND SETTINGS
Loading ...
Loading ...
Loading ...