Loading ...
Loading ...
Loading ...
Page 13
WARNING:
Attempting a bevel
cut without fully tightening the bevel-lock
knob can result in serious injury.
TURNING THE SAW ON AND OFF
(FIG. 9)
FIG. 9
Lock-Off Button
Trigger
Swithch
1. Attach the battery pack to the saw.
2. To turn the saw on, depress the lock-
off button from either side and then
depress the trigger switch.
3. To turn the tool off, release the trigger
switch.
CUTTING MARK (FIG.10)
FIG. 10
45° indicator0° indicator
When making a cross cut or rip cut, align
your line of cut with the center of the notch
by the 0° indicator. When making a 45° bevel
cut, align your line of cut with the center of
the notch by the 45° indicator.
RIP CUTTING (FIG. 11)
FIG. 11
The combination blade provided with your
saw is for both rip cutting and cross cutting.
Ripping is cutting lengthwise along the grain
of the wood. When rip cutting a large sheet,
use a straight edge guide (included).
1. Secure the workpiece.
2. Depress the trigger switch to start
the saw. Allow the saw to reach full
speed before engaging the blade in the
workpiece.
3. Carefully guide the saw along the
workpiece.
4. After completing the cut, release the
trigger switch and allow the blade to
come to a complete stop. After the
blade has stopped, remove the saw
from the workpiece.
OPERATION
Loading ...
Loading ...
Loading ...