Loading ...
Loading ...
Loading ...
Page 11
OPERATION
2. Pull the battery pack to remove it from
the tool.
VACUUM ADAPTOR (FIG. 3)
FIG. 3
Vacuum Adaptor
Your tool is shipped with a vacuum adaptor
for connecting vacuum cleaner hose with
Ø1-1/4”.
1. To attach the vacuum adaptor to the
saw, insert it into the hole on the upper
blade guard.
2. To remove the vacuum adaptor from the
saw, pull out the vacuum adaptor.
EDGE GUIDE (FIG. 4)
FIG. 4
Locking Screw
Edge Guide
Always use an edge guide when making
long or wide rip cuts with your saw. The
edge guide can be used on the left or right
side of the blade.
1. Insert the edge guide into the slot on the
front of the base of the tool and adjust
the edge guide to the desired width.
2. Insert the hex key (included) into the
hex hole on the locking screw and then
rotate the hex key clockwise to lock the
edge guide in place.
3. To remove the edge guide, rotate the
hex key counterclockwise to unlock.
HOOK (FIG. 5)
FIG. 5
Hook
Your tool is equipped with a convenient
hook. Use the hook to hang the saw from
a rafter or beam or other similar secure
structure for temporary storage during
work. Recommended lumber size to
support the saw with the hook is 2x4. To
use, simply lift up hook until it snaps into
the open position. When not in use for
hanging, always lower the hook until it
snaps into the closed position.
LED WORK LIGHT (FIG. 6)
FIG. 6
LED
Work Light
Loading ...
Loading ...
Loading ...