Loading ...
Loading ...
Loading ...
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
= Depress clutch/brake pedal fully and set parking brake.
= Place motion control lever in neutral (N) position.
= Place attachment clutch in "DISENGAGED" position.
= Turn ignition key "OFF" and remove key.
o Make sure the blades and all moving parts have completely stopped.
° Disconnect spark plug wire from spark plug and place wire where itcannot come in contact with
plug.
...... = 1, = .......................
TRACTOR
TO REMOVE MOWER (See Fig. 19)
Mower wi!!be easier to remove from the rig htside oftractor°
, Place attachment clutch switch in "DISENGAGED"
position.
- Move attachment lift fever forward to lower mower to its
lowest position.
• Roll belt off electric clutch pulley.
= Disconnect anti-sway bar' from chassis bracket by
removing retainer spring_
o Disconnect suspension arms from rear deck brackets
by removing retainer springs_
= Disconnect front links from deck by removing retainer
spnngs_
, Raise lift lever to raise suspension arms. Slide mower
out from under tractor,
IMPORTANT: IF AN ATTACHMENT OTHER THAN THE
MOWER DECK IS TO BE MOUNTED ON THE TRACTOR,
REMOVE THE FRONT LINKS..
TO INSTALL MOWER (See Fig. 19)
. Raise attachment lift lever to its highest position_
o Slide mower undertractorwith discharge guard to right
side of tractor.
° Lower lift lever to its lowest position.
= Install mower' in reverse order' of removal instructions.
SUSPENSION ELECTRIC
ARMS CLUTCH
PULLEY FRONT
LINK
SPRINGS
\ (BOTH SIDES)
RETAINER
SPRING
ANTI-SWAY BAR
RETAINER
SPRINGS
(BOTH SIDES)
FIG. 19
20
Loading ...
Loading ...
Loading ...