Loading ...
Loading ...
Loading ...
T
HOWTOUSEYOURLAWNMOWER
ENGINESPEEDCONTROL
The engine speed is controlled by a lever (red knob)
located on the right side of the engine. "HIGH" posi-
tion is for starting engine, normal cutting and better
grass bagging. "LOW" position is for light cutting,
trimming and furl economy (See Fig. 5).
ENGINEZONE CONTROL
CAUTION: FEDERALREGULATIONSREQLIIREAN
ENGtNECOHTROLTO 8E INSTALLEDON THIS
LAWN MOWER IN ORDERTO MBHIMiZE THE
RtSE OF gLADE COHTACTJNJLtR¥_ DO NOT
UNDERANY GRCgMSTANCESATTEMPTTO DE-
F_,_T THE FUNCTION OF THE OPERATOR
CONTROL,THEBL_OETLtRHSWHENTHEENGINE
!$ RUNNING.
Your Lawn Mower is equipped with an Operator
Engine Control Bar which requires the operator
to be positioned behind the Lawn Mower Han-
dle to start and operate the lawn mower.
I)RIVE CONTROL
• Self-propelling is controlled by holding the
Operator Presence Control Bar down to the Han-
dle and pushing the Drive Control Lever forward
until it clicks; then release the Lever (See Fig. 6).
® Forward motion will stop when the Operator
Presence Control Bar is released. To stop forward
motion without stopping the engine, release the
Operator Presence Control Bar slightly until the
Drive Control disengages. Hold Operator
Presence Control Bar down to Handle to continue
mowing without self-propdling.
o To keep Drive Control engaged when turning cor-
ners, push down on Handle and lift Front Wheels
off ground while turning lawn mower.
NOT_: When your lawn mower is new, the Drive
Wheels may rotate without the Drive Control engag-
ed when the Wheals are lifted off the ground. This
is normal and should stop after the first few hours
of operation.
TO EMPTYGRASSCATCHER
PRIMER
CONTROL
DRIVE CONTROL DtSENGAGED
Ft$. 6
/
'L
Ft6.7
To remove Grass Catcher, release Operator
Presence Control Bar to stop engine.
, Lift up Rear Door and remove the Grass Catcher
by the Handle (See Fig. 7).
* Do not drag the Bag when emptying; it wiJf cause
unnecessary wear.
Loading ...
Loading ...
Loading ...