Loading ...
Loading ...
Loading ...
J T
.....ENGINESPEED
...... i
Your engine speed has been factory set. Do not at-
tempt to increase engine speed or it may result in per-
sonal injury. If you befieve that engine is running too
fast or too slow, take your mower to an authorized
Sears Service Center for repair and adjustment.
REARDEFLECTOR
The Rear Deflector, attached between the Rear
Wheels of your lawn mower, is provided to minimize
the possibility that objects will be thrown out the rear
of the lawn mower into the operator's mowing
position.
_f the Rear Deflector becomes damaged, it should
be replaced.
TO ADJUSTHANDLE
Your Lawn Mower Handle can be raised or lowered
for your mowing comfort. Figs. t 6A, ! 6B, ! 7A and
17B show the four (4) positions that are available:
High, Medium High, Medium Low and Low. Handles
are shipped mounted in the Medium Low position
(See Fig. 16A)
To change from Medium Low to Medium High
position, the Upper and Lower Handle sections
will have to be turned over (See Fig. t6B).
, Remove the Controls and Operator Presence Con-
troJ Bar from the Upper Handle.
* Remove the Starter Rope Guide from the Lower
Handle.
* Remove Hairpin Cotters.
® Disconnect the Lower Handle from the Handle
Brackets (See Fig. 18).
o Turn the Handle over and reassemble the Hair-
pin Cotters that have been removed (See Fig. 18).
_, Reassemble the Starter Rope Guide.
* Reassemble the Controis and the Operator
Presence Control Bar to the Upper Handle.
CAUTION: THEOPERATORPRESENCECONTROL
BAR MUST PIVOT FREELYTO PERMIT BLADE
BRAKEENGAGEMENTWHEN CONTROLBAR IS
RELEASED. DO NOT OVERTIGHTEN THE
FASTENERSHOLDINGTHE CONTROLSTO THE
UPPEEHANDLE.
To change frorn Medium Low to High position on-
ly the Upper Handle section will have to be turn-
ed over (See Fig. 17A).
To change from Medium Low to Low position, on-
ly the Lower Handle section will have to be turn-
ed over (See Fig. 17B).
_z° l
HAIRPIN CLIP
HANDLE BRACKET
FIG. 18
15 37278g
Loading ...
Loading ...
Loading ...