Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
61
Safety distances to the sides and
back of the appliance
The minimum distance shown below
must be maintained between the back
edge of the cooktop and a tall unit or
wall.
Ideally the cooktop should be installed
with plenty of space on either side.
There may be a wall at the rear or a tall
unit or wall on one side (right or left),
taking into account the distances
below. On the other side, however, no
tall unit or wall should stand closer than
200mm to the edge of the cooktop.
Before installing the cooktop, check
that the below clearance requirements
are met.
Minimum horizontal distance from the
back edge of the cooktop to a
combustible surface:
50mm.
Minimum horizontal distance from the
right edge of the cooktop to a
combustible surface:
50mm.
Minimum horizontal distance from the
left edge of the cooktop to a
combustible surface:
50mm.
Minimum safety distance underneath
the cooktop
To ensure sufficient ventilation to the
cooktop, a minimum distance must be
left between the underside of the
cooktop and any oven, interim shelf or
drawer.
The minimum safety distance between
the underside
1
of the cooktop and
- the top edge of an oven: ≥ 15 mm
- the top edge of an interim shelf: ≥ 15
mm
- the top edge of a drawer: ≥ 8 mm
- the base of a drawer: ≥ 75 mm
1
The underside is the outside of the
cooktop casing. Other items that are
attached lower down, such as
connection boxes and spacer plates, do
not count as the lowest point and are
not relevant when calculating the
minimum safety distance.
Loading ...
Loading ...
Loading ...