Loading ...
Loading ...
Loading ...
Before using for the first time
23
Setting up Miele@home
Connecting via the App
The Miele App can be used to connect
to your network.
Install the Miele App on your mobile
device.
To log in you will need:
1. Your Wi-Fi network password.
2. The password of your cooktop.
The password for your cooktop
consists of the last nine digits of the
serial number. This can be found on the
appliance's data plate.
Switch the cooktop on.
Start the Miele App.
Touch the 0sensor on any of the
numerical keybanks.
Touch the0 and 5 sensors at the
same time for 6seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, the code : is
displayed in the timer display for
10seconds.
You now have 10 minutes to configure
the Wi-Fi.
Follow the instructions in the App.
Connecting via WPS
You must have a WPS (Wi-Fi
protected setup) compatible router.
Switch the cooktop on.
Touch the 0sensor on any of the
numerical keybanks.
Touch the0 and 6 sensors at the
same time for 6seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, a progress light will
appear during the connection attempt
(for max. 120seconds).
The WPS login is only active during
these 120seconds.
Activate the WPS function on your
router.
If the connection was successful, the
code : appears in the timer display.
If the connection could not be
established, the timer display will show
the code:. You have probably not
activated WPS on your router quickly
enough. Repeat the steps above.
Useful tip: If your Wi-Fi router does not
support WPS, please connect via the
Miele App.
Loading ...
Loading ...
Loading ...