Loading ...
Loading ...
Loading ...
14
Custom drawer front
(Only for Push to Open Drawer)
Custom panels must meet the following requirements:
• Have a minimum thickness of 3/4” (19 mm).
• Have all edges finished.
• If using wood, the back must be sealed to prevent moisture
damage.
• Be capable of withstanding temperatures above 158 °F (70 °C).
Custom Drawer Front Preparation
1. Mark pilot holes on the back side of the panel according to the
dimensions indicated in the following drawing.
2. Drill pilot holes with a 3/32” (2.5 mm) drill bit. Be careful not to
drill all the way through the panel. Pilot holes should only be
7/16” (11 mm) deep.
A
B C
D D D ==
==
PILOT HOLES
7/16” (11 mm)
dia. 3/32”
(2.5 mm)
Dimensions
inches mm
A 29 - 5/ 8” to 29 - 7/8” 754 to 758
B 10 - 3/ 8” 264
C 7 - 5/ 8” 193
D 8 - 13/16” 224
Loading ...
Loading ...
Loading ...