Loading ...
Loading ...
Loading ...
ASSEMBLY
Your Mantis Tiller comes partially
assembled. You must install only the
handlebars, the carrying handle, and the
tines. This will take just a few minutes if
you tbltow the directions.
First, take all items out of the
carton. But do not remove the
cardboard from around the Tiller's
base.
The list at the right, shows the parts
that come with your tiller. Check to make
sure you have them.
The bag of hardware is in the plastic
bag containing the Owner's Manual and
Video.
To assemble your Mantis "Filler, you'll
need two 7116" wrenches or two
adjustable wrenches. We suggest that you
install all nuts and bolts only "finger
fight" -- that is, one-half to one full
turn- until you've completed
assembly. The nuts are self locking,
but yon must use a wrench to tighten
them completely.
Quantity
1
1
2
1
1
1
1
1
Description *Key #
Upper Handle Without Throttle 5
Upper Handle With Throttle 4
Lower HanOes 6
Pair Tiller!Cuhivator Tines 46/47
Engine Assembly (includes Fender
Guard & Vv_rm Gear Transmission) 7
Handle Brace 8
Plastic Carrying Handle 49
Bag of Hardware Containing:
4 Cap Screws t 1
6 Lock Nuts 12
2 Bolts (3" tong) 23
2 Tine Retaining Pins 48
2 Handle Clamps 22
1 Throttle Clip i5
*These numbers are the same numbers shown on the Parts
Layout on page 27.
q
Loading ...
Loading ...
Loading ...