Loading ...
Loading ...
Loading ...
9
DOOR ADJUSTMENTS
Grille Installation
REMOVING AND INSTALLING GRILLE
Removing the grille
1. Disconnect power to the unit.
2. Loosen the two screws (1).
3. Remove grille (2) from unit.
Installing the grille
1. Align cabinet and grille holes and secure, but do not
over tighten grille screws (1).
2. Reconnect power to the unit.
!
WARNING
WARNING - Disconnect electric power to the unit
before removing the grille. When using the unit, the
grille must be installed.
!
WARNING
WARNING - DO NOT touch the condenser fins.
The condenser fins are SHARP and can be easily
damaged.
2
1
Figure 21
Door Swing
Units have a zero clearance for the door to open 90
o
, when
installed adjacent to cabinets.
Stainless steel models require 2-1/8” (54 mm) door
clearance to accommodate the handle if installed next to a
wall.
Door Adjustments
HINGE COVER
Hinge cover included with the literature bag is optional.
To install hinge cover:
• Press hinge cover squarely over hinge.
Door Alignment and Adjustment
Align and adjust the door if it is not level or is not sealing
properly. If the door is not sealed, the unit may not cool
properly, or excessive frost may form in the interior.
Properly aligned, the door’s gasket should be firmly in
contact with the cabinet all the way around the door (no
gaps). Carefully examine the door’s gasket to ensure that
it is firmly in contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of the door.
Figure 22
Wall
90°
Door Swing
2-1/8" Min.
(54 mm)
Hinge Cover
Figure 23
NOTE
Loading ...
Loading ...
Loading ...