Loading ...
Loading ...
Loading ...
- 8 -
CONNECT DUCTWORK
(DUCTED HOODS ONLY)
1. Install the discharge collar into the duct
connector of the range hood. Fig. 7
2. Use 6” round metal duct to connect the
discharge collar on the hood to the duct-
work above. See Fig. 8
3. Use duct tape to make all joints secure
and air tight.
4. Insert the unit plug into the power outlet.
FIGURE 7
DISCHARGE
COLLAR
DUCT
CONNECTOR
NON-DUCTED RECIRCULA-
TION FILTER INSTALLATION
(NON-DUCTED HOODS ONLY)
1. Install the discharge collar into the duct
connector of the range hood. Fig. 7
2. Refer to Figure 8B. Connect a 6” round
metal duct to the discharge opening so
that the air is sent outside the cabinet and
sent back into the room.
3. Position the fi lters over the blower.
4. Rotate to lock fi lters in place.
5. Purchase replacement fi lter packs (con-
tains 2) from your dealer.
Part No. FILTEREB40.
CHARCOAL
FILTERS
FIGURE 9
FIGURE 8
Ø 6”
ROUND
METAL
DUCT
FIGURE 8B
Ø 6”
ROUND
METAL
DUCT
Loading ...
Loading ...
Loading ...