Loading ...
Loading ...
Loading ...
QUESTIONS?
BEFORE YOU CALL FOR SERVICE...
PROBLEM
TOP BURNERS DO NOT
LIGHT OR DO NO_
BURN EVENLY
BURNER FLAMES VERY
LARGE OR YELLOW
POSSIBLE CAUSE
SURFACE BURNERS
LIGHT BUT OVEN
DOES NOT
• Make sure electrical plug is plugged into a live power outlet.
• Burner holes on the side or around the top of burner may be clogged. Remove
burners Ion models with standard twin burners) or burner heads (on models with
sealed burners l or bumer caps on spill-proof models, and clean them with a
sewing needle or twist-tie. Make sure you do not enlarge the holes. On
spill-pro•f models, check electrode area for burned-on food or grease.
• Make sure the drip pans are installed correctly
• Pilot(s) is (are) not lit (on standing pilot models _. See the Lighting Instructions
for Standing Pilot Models in Surface Cooking.
• If range is connected to LP gas. contact the person who installed your range
or made the conversion.
The oven gas shut-off valve may have accidentally been moved during
cleaning or moving
To check the oven gas shut-off valve on standard twin burner models, raise
the cooktop and look lbr the gas shut-off lever at the extreme right rear corner.
(Standing pilot models do not have a gas shut-off valve on the regulator.
Follow the directions in box A or B that match your regulator type.
Lever snown closed. /
Standard Twin Burner Models
shown closed./
Standard Twin Burner Models
To check the oven gas shut-off valve on sealed burner models, remove the
storage drawer, broiler drawer or kick panel and look for the gas shut-off
lever at the back of the range.
Follow the directions in box A or B that match your regulator type.
._ealed Burner Models
closed, PULL
TO OPEN.
\
\
Sealed Burner Models
(contimled next page)
43
A
v
Loading ...
Loading ...
Loading ...