Loading ...
Loading ...
Loading ...
15
In Preset Mode, click on these buttons to select the corresponding mode for the knob.
• Chan: The knob will send its messages over this channel. Select the global channel
(Global), a specific channel (Channel 1–16), a zone (Zone 1–4), or all channels (Omni).
• CC: The knob will send its MIDI messages using this CC number.
• Down: The knob’s minimum position will correspond with this value. You can reverse the
knob’s polarity by making this value larger than the Up value.
• Up: The knob’s maximum position will correspond with this value. You can reverse the
knob’s polarity by making this value smaller than the Down value.
When set to DAW Mode, these are the available parameters. The parameters below will
depend on your selection.
• Chan: The knob will send its messages over this channel. Select the global channel
(Global), and a specific channel (Channel 1–16).
• Mode:
o CC: When set to CC, the knob will send standard MIDI CC messages to your DAW.
o Mackie: When set to Mackie Control, you can use the knob with a DAW that responds
to Mackie Control mode.
o Mackie/HUI: When set to Mackie/HUI, you can use the knob with a DAW that
responds to HUI mode.
Loading ...
Loading ...
Loading ...