Loading ...
Loading ...
Loading ...
11
When the Push tab is selected in DAW Mode, select from these options to set the MIDI assignments
for when it is pushed. The parameters below will depend on your selection.
• Chan: The encoder will send its messages over this channel. Select the global channel (Global)
or a specific channel (Channel 1–16).
• Mode: This will specify what message will be sent when the Encoder is turned.
o CC: When set to CC, the encoder will send standard MIDI CC messages to your DAW.
o Program: The encoder will send its MIDI messages using the selected Program number
and MSB and LSB values.
o Mackie: When set to Mackie Control, you can use the encoder with a DAW that responds
to Mackie Control mode.
o Mackie/HUI: When set to Mackie/HUI, you can use the encoder with a DAW that
responds to HUI mode.
• CC: Selects the MIDI CC value that will be sent when the encoder is pressed.
• Down: The encoder will send this CC value when you press it.
• Up: The encoder will send this CC value when you release it.
• Program: The encoder will send this program number when you press it.
• MSB: The encoder will send this Bank MSB (Most Significant Byte) number when you press it.
• LSB: The encoder will send this Bank LSB (Least Significant Byte) number when you press it.
Loading ...
Loading ...
Loading ...