Loading ...
Loading ...
Loading ...
10
Encoder
Click on the Encoder in Preset Mode to set the MIDI assignments for when it is pushed and when it is turned.
When the Push tab is selected in Preset Mode, select from these options. The parameters below will
depend on your selection.
• Chan: The encoder will send its messages over this channel. Select the global channel (Global), a
specific channel (Channel 1–16), a zone (Zone 1–4), or all channels (Omni).
• Mode:
o CC: The encoder will send its MIDI messages when pressed using the selected CC number and
Up/Down values.
o Program: The encoder will send its MIDI messages using the selected Program number and
MSB and LSB values.
o Same As DAW: The encoder will send its MIDI messages based on what is set in your DAW.
• CC: Selects the MIDI CC value that will be sent when the encoder is pressed.
• Down: The encoder will send this CC value when you press it.
• Up: The encoder will send this CC value when you release it.
• Program: The encoder will send this program number when you press it.
• MSB: The encoder will send this Bank MSB (Most Significant Byte) number when you press it.
• LSB: The encoder will send this Bank LSB (Least Significant Byte) number when you press it.
Loading ...
Loading ...
Loading ...