Loading ...
Loading ...
Loading ...
en Installation instructions
22
12.
Remove the on-site cable from the terminal plug
and remove the protective tube.
LN
13.
Loosen the four cable clamps.
14.
Open the cable tensioner and pull out the cables.
15.
Thread the cables out of the frame cover.
16.
ATTENTION!
There is a risk of damage to the appliance if the
cable is coiled up.
▶ Always secure the cable firmly using the strain
relief so that it does not coil up fully in the appli-
ance.
Thread the cable on the appliance through the
opening in the frame cover and use the strain relief
to secure it.
17.
Remove the diagonally opposite screws on the
frame.
18.
Loosen the two other diagonally opposite screws.
19.
Move the frame and remove it.
Note:If you reinstall the appliance, you will need to re-
set the appliance to the factory settings →Page8.
Loading ...
Loading ...