ION100V-21SB-CT-RM OPERATOR’S MANUAL

Loading ...

Maintenance

To order genuine replacement parts or accessories for the

Snow Joe

iON100V-21SB-CT cordless snow blower, please

visitsnowjoe.comorcontacttheSnowJoe

+ Sun Joe

customer service center at 1-866-SNOWJOE

(1-866-766-9563).

mWARNING! Makesuretoturnotheswitchand

remove the battery pack(s) before performing any maintenance

task on your snow blower.

General Maintenance Tips

1. Do not attempt to repair the machine unless you have the

proper tools and instructions for disassembly and repair of

the machine.

2. Check bolts and screws at frequent intervals for proper

tightness to ensure that the equipment is in safe working

condition.

3. After each snow removal,shutothemotor,waitforall

revolving parts to stop completely, remove the battery

pack(s) andwiperesidualiceandsnowotheunit.

Proper Care for Battery + Charger

mWARNING! Toreducetheriskofinjury,alwaysunplug

the charger and remove the battery pack(s) from the charger

before performing any maintenance task. Never disassemble

the battery pack(s) or charger. Contact your Snow Joe

Sun Joe

dealer or the Snow Joe

+ Sun Joe

customer

service center for ALL repairs.

1. Toreducetheriskofinjuryanddamage,neverimmerse

your battery pack(s) or charger in liquid or allow any liquid

toowinsidethesecomponents.

2. Clean out dust and debris from charger vents and

electrical contacts by blowing with compressed air.

3. Use only mild soap on a damp cloth to clean the battery

pack and charger, keeping away from all electrical

contacts. Certain cleaning agents and solvents are harmful

to plastics and other insulated parts. Some of these

include gasoline, turpentine, lacquer thinner, paint thinner,

chlorinated cleaning solvents, ammonia and household

detergentscontainingammonia.Neveruseammable

or combustible solvents around battery packs, battery

chargers or tools.

4. The iON100V-RCH lithium-ion battery charger (sold

separately) has no serviceable parts.

Replacing Scraper Bar

IMPORTANT! Damage to auger housing will result if the

scraper bar wears down too far.

To replace scraper bar:

1. Positionunitonahard,at,smoothlevelsurface.

2. Detach the worn scraper bar from the snow blower by

removing the 4 sets of nuts, washers and bolts that hold it

in place (Fig. 21).

3. Install the new scraper bar and fasten it securely to the

snow blower with the original sets of nuts, washers and

bolts.

Replacing Auger Blades

During use, the auger blades will wear down over time, which

will eventually cause incomplete cleaning. If the unit cannot

plow snow completely and leaves snow on ground, consider

changing the auger blades.

mWARNING! Replacing the auger blades involves close

operationwiththeaugerandtheblades.Toavoidinjury

caused by unintentional starting, make sure the battery pack(s)

are not inserted before proceeding with the operation, and

wear heavy duty gloves during operation.

Fig. 20

pattern A

pattern B

Fig. 21

Scraper

bar

Loading ...

OPERATOR’S MANUAL - Page 16