Loading ...
Loading ...
Loading ...
9
For more information on how to have your device re- calibrated or to replace a valid certificate,
contact us at calibration@summitappliance.com.
Probe Port
This unit is equipped with a 3/8” probe port and plug, which can accept additional monitoring
devices. It is advisable to position the additional temperature monitoring device in the net usable
area (inside ideally near the product sensor).
Summary of Alarm Types
ALARM TYPE
DISPLAY FLASH
Air temperature high alarm
HI delay alarm
Air temperature low alarm
LO delay alarm
Air temperature sensor short circuited
1H in time alarm
Air temperature sensor open circuited
1L in time alarm
Product temperature sensor short circuited
2H in time alarm
Air temperature sensor open circuited
2L in time alarm
Product temperature high temp alarm
H2 delay alarm
Product temperature low temp alarm
L2 delay alarm
Electric supply off alarm
No display – alarm in time
Door open delay alarm
Dr flash and delay alarm
Storage of Articles
•
At maximum loading level, the content should not block the refrigerator’s air flow or be loaded
above the load line.
•
Leave space around the contents to allow a smooth flow of cold air inside the cabinet. To
prevent freezing, be sure the articles do not touch the back of the interior cabinet.
•
Store articles away from the inner fan.
•
Shelves can be adjusted to allow proper airflow around the products being stored.
Loading ...
Loading ...
Loading ...