Loading ...
Loading ...
Loading ...
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
30
30
After disconnectionConnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
After disconnectionConnected
2.
Y
Tap the “CASIO WATCHES” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
Note
●
If you are unable to re-pair the watch
with a phone after unpairing them, use
the procedure below to delete pairing
information from the watch and then
perform the pairing operation again.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (B) for about 10
seconds.
This deletes the pairing information.
The second hand will point to [C].
C
X
Push the crown back in.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
C
Pair the watch with a phone.
Note
●
If your previous phone is near the
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new phone.
If this happens, use the procedure
below to delete the previous pairing
information from the watch. Also,
unregister the watch from the phone
you will no longer connect with.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (B) for about 10
seconds.
This deletes the pairing information.
The second hand will point to [C].
C
X
Push the crown back in.
Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch’s time and day settings when time
calibration signal reception or communication
with a phone is not possible for some reason.
Selecting Your Home City’s
Time Zone
Use the procedure in this section to select the
time zone of the city you want to use as your
Home City.
Important!
●
If you do not specify the time zone
where you are using the watch, the
current time setting will not be correct
after it is adjusted based on a time
calibration signal.
1. Pull out the crown to the second click.
The second hand indicates the currently
selected time zone, while the mode hand
indicates the current summer time setting.
●
The time zone is indicated as a time
offset. ±0 hours is indicated when the
second hand is at 12 o’clock, with other
offsets indicated when it is to the left and
right of 12 o’clock. For information about
time zone positions, go to the section
below.
l
City (Time Zone) List
Tokyo (+9 offset)
30
CrownCrown
Time zone (+9 position)
Summer time setting
2. Rotate the crown to change the time zone.
3. Push the crown back in to its normal
position.
Operation Guide 5526
11
Loading ...
Loading ...
Loading ...