Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK. RWJB1021
Helpline:
+
44
(
0
)
23 8049 4344 Sales Desk:
+
44
(
0
)
23 8049 4333 General Enquiries:
+
44
(
0
)
23 8026 6355 internet: drapertools.com email: [email protected]
1. INSTRUCTIONS
• View the main scale with the angle perpendicular to the handgrip.
• In order to extend the product service life, the torque setting should be adjusted to the minimum value if the product is not
to be operated for a long period.
Locking collar scale
Handgrip
Main scale
Quick release bit holder
Examples of torque settings
Locking
Collar
Scale
0.02 N-m.
Main
Scale
0.3 N-m
2 N-m
2.3 N-m
Lock
Unlock
Increase
Reduce
1. Pull out the locking collar for
setting torque, turn Left to
increase torque, turn right to
reduce torque.
2. Torque setting is based on
main scale plus locking
collar scale. Adjust the
locking collar scale, which is
in increments of 0.02 N-m.
3. After adjusting torque
setting, push down locking
collar into “Lock” position.
EXAMPLE- 2.3 N-m
Designed for applying the correct torque for engine casing screws, camshaft position sensors, ignition coils etc.
• Locking collar prevents accidental change of torque setting.
•
+
/
-
6% clockwise accuracy, complies with ISO:6789.
• Range 1-5Nm.
• Only for clockwise torque tightening, cannot be used on reverse thread fixings.
TORQUE
SCREWDRIVER
75170
