Loading ...
Loading ...
Loading ...
Have questions? Call 1-800-297-1605
21
Use only approved batteries and the supplied UL approved power adapter with your SimpliSafe Home Security System. Any tampering
with the product or other unauthorized use will void your limited warranty. To prevent a fire hazard or electrical shock, do not expose
the Base Station (SSBS3) or other components to water or operate the System while you are wet or standing in water. Be sure that
electrical and telephone cords used are not frayed or placed in a location where they can pose a danger.
Caution: To ensure proper operation, this equipment must be installed according to the enclosed installation instructions. To verify
that the equipment is operating properly and can successfully report an alarm, this equipment must be tested immediately after
installation, and periodically thereafter, according to the enclosed test instructions (pages 17-18).
Caution: Please verify periodically that components remain firmly adhered. A falling component could harm a passing person. Also,
swallowing a small piece, such as a magnet or battery could be harmful. To decrease the risk of false alarms and children swallowing
small pieces, do not install sensors where children may be able to reach them
Power Supply: Input: 100-240 VAC, 50/60Hz, 0.4A Max, Output: 6.5VDC, 1.6A
DONGGUAN GANGQI ELECTRONIC CO LTD, GQ12-065160-AU
Batteries: Base Station: Four(4) Eneloop BK-3MCCA, 1.2V min 1900mAh OR FB 1000, 1.2V, 1000mAh, NiMh.
(Note: NiMh batteries must be recycled or disposed of properly). Keypad: four 1.5V Alkaline, size AA.
Motion, Glassbreak Sensors: one 3V Lithium, size CR123A. Panic Button, Temperature, Water Sensors, Entry
Sensors: one 3V Lithium, size CR2032.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Operating Temp: Base Station: Model SSBS3 Operating Temperature 32°F to 104°F, 90% Max. Humidity
Keypad: Model SSKP3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Keyfob: Model SSKF3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Entry Sensor: Model SSES3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Motion Sensor: Model SSMS3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Panic Button: Model SSPB3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Glassbreak Sensor: Model SSGB3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Smoke Detector: Model SSSD3-0 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Carbon Monoxide Detector: Model SSCO3-0 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Water Sensor: Model SSWT3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Temperature Sensor: Model SSFS3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
Extra Siren: Model SSWS3 Operating Temperature 32°F to 120°F, 90% Max. Humidity
SimpliCam: Model SSCM1 Operating Temperature 14°F to 104°F, 90% Max. Humidity
Product Safety Information
Your system may occasionally receive optional system updates to add features and
functionality. If your system is connected to wifi and there is an update available, you will
see a gear symbol on the left side of your Keypad’s screen. Press the o button to
refresh your Keypad’s screen to determine if an update is available. To accept the update,
follow the prompts and wait for your Base Station and Keypad to reboot. The update
process may take between 10 and 20 minutes, during which your system will be oine.
After the update is complete, you will have to select the gear icon on each additional
Keypad you own to update them as well.
System Updates
Loading ...
Loading ...
Loading ...